Table of Contents
Advertisement
Connect Vent; Connect Inlet Hose - Whirlpool Cabrio W10164752A Use & Care Manual [Page 11]
3. Check that there are no kinks in the flexible gas line.
4. Once the exhaust vent connection is made, remove the corner
posts and cardboard.
Connect Inlet Hose
The dryer must be connected to the cold water faucet using the new
inlet hoses. Do not use old hoses.
1. Turn cold water faucet off and remove washer inlet hose.
2. Remove old rubber washer from inlet hose and replace with new
rubber washer provided. If space permits, attach the brass female
end of the "Y" connector to the cold water faucet.
NOTE: If "Y" connector can be attached directly to cold water
faucet, go to Step 6. If "Y" connector cannot be attached
directly to the cold water faucet, the short hose must be used.
Continue with Step 3.
3. Attach short hose to cold water faucet. Screw on coupling by
hand until it is seated on faucet.
Next page
Previous page
Dryer Whirlpool WGD6600W Dimensions And Installation Information
Gas dryer (1 page)
Dryer Whirlpool WGD6200S Product Dimensions
Gas dryer (1 page)
Dryer Whirlpool Cabrio W10164159A Use & Care Manual
Steam fabric care system electric dryer (56 pages)
//static-data2.manualslib.com/manual/190510/Whirlpool-Cabrio-W10164752a.html?page=11 (3 of 7)3/20/2018 3:44:29 AM
1 ... 7 8 9 10
11
Related Manuals for Whirlpool Cabrio W10164752A
NOTE: Do not overtighten. Damage to the coupling can result.
11. Check that the water faucets are on.
12. Check for leaks around "Y" connector, faucet, and hoses.
Table of Contents
12 13 14 15
11
Advertisement
Advertisement
Table of Contents
