Panasonic MINAS A5 Series Operating Instructions Manual page 23

7. Conformity to EC Directives and UL Standards
Composition of Peripheral Equipments
Noise Filter
When you install one noise filter at the power supply for multi-axes application, consult with
manufacturer of the noise filter. If sufficient noise margin is required, connect 2 filters in series.
• Recommended components
Voltage specifications Manufacturer's
for driver part No.
3-phase 200V FS5559-60-34
3-phase 200V FS5559-80-34
C
A
D
M8
Voltage specifications Manufacturer's
for driver part No.
3-phase 400V FN258-42-07
3-phase 400V FN258-42-33
<FN258-42-07>
300 500±10
12
314 70
329
• Select a noise filter whose
Remarks
capacity is commensurate
with the power source ca-
pacity (in consideration of
the load condition).
• For the detailed specifications
of each noise filter, contact the
manufacturer.
Applicable driver
Manufacturer
(frame)
G-frame
Schaffner
H-frame
Circuit L1
diagram
L2
L3
PE
LINE
[Size]
A B C
FS5559-60-34 410 170 370
FS5559-80-34 460 180 420
[Unit: mm]
Applicable driver
Manufacturer
(frame)
G, H-frame
Schaffner
G, H-frame
<FN258-42-33>
300
70
314
329
350
Circuit diagram
L1
L2
L3
E
LINE
− B44 −
7. Conformity to EC Directives and UL Standards
Composition of Peripheral Equipments
Surge Absorber
Provide a surge absorber for the primary side of noise filter.
Option part No.
DV0P1450
DV0PM20050
ø4.2±0.2
L1'
L2'
L3'
LOAD
1 2 3
D
388
41±1
438
Noise Filter for Signal Lines
Install noise filters for signal lines to all cables (power cable, motor cable, encoder
cable, interface cable and USB cable)
<24V Power cable, Encoder cable, Interface cable and USB cable>
Option part No.
DV0P1460
39±1
34±1
[Unit: mm]
Caution
Fix the signal line noise filter in order to prevent excessive stress to the
L1'
L2' cables.
L3'
E
LOAD
Voltage specifications Manufacturer's
for driver part No.
3-phase 200V R･A･V-781BXZ-4
3-phase 400V R･A･V-801BXZ-4
Circuit diagram
[Unit: mm]
1
UL-1015 AWG16
Manufacturer's
Manufacturer
part No.
ZCAT3035-1330 TDK Corp.
[Unit: mm]
Remarks
Mass: 62.8g
− B45 −
Manufacturer
Okaya Electric Ind.
2
3
To connect the noise filter to
the connector XB
connection cable, adjust the
sheath length at the tip of
the cable, as required.