Figure - Philips SACD 1000/001 Service Manual

GB 6 2. SACD 1000
2.2 Service hints
2.2.1 Switched Mode Power Supply 1004
This power supply unit is not repairable and must be
exchanged completely in case of failure. A new power supply
can be ordered with codenumber 3104 129 22150.
2.2.2 SACD module
This module can be repaired as follows:
1. The loader and DVD-M(echanism) is one assembly
(VAL6011) item 81. This assembly is a not repairable unit
and must be exchanged completely in case of failure. A
new unit can be ordered with codenumber 9305 023
61101 (for Europe and Asia Pacific) and 9305 023 61102
(for USA).
2. The mono board has to be repaired down to component
level. Repair handling of the monoboard requires a
workshop with sophisticated desoldering tools.
2.2.3 Service positions
SACD module
See also dismantling instructions.
After demounting the DAC PCB 1005 and the dust bracket
241, it is possible to connect the PC connection and to
demount the SACD module to service the MONO PCB. After
remounting the DAC PCB, the SACD module can be placed
on top of the DAC PCB, protected by an insulation plate.
MONO PCB

Figure 2-1

Figure 2-2
Warnings, laser safety and service hints
CL 06532152_002.eps
051200
CL 06532152_003.eps
051200
DAC PCB
Figure 2-3
AV PCB
Figure 2-4
Figure 2-5
CL 06532152_004.eps
051200
CL 06532152_005.eps
051200
CL 06532152_006.eps
051200