Setting The Operation (On/Off/Auto/All Day) - ESI ES1247B User Instructions

5. The display will now show the 2nd ON time. Repeat
steps 3-4 until all remaining ON/OFF periods have
been set. On the last OFF period, press the Day button
until the next desired day/block of days you want to
programme is flashing.
6. Repeat steps 3-5 until all days/block of days have been
programmed.
7. Wait 15 seconds to automatically confirm or press the
Home button. Move the slider to RUN to return to
Run Mode.
N.B. The copy button can be used in the 7 day setting to copy
any chosen day to the next day (e.g Mon to Tues or Sat
to Sun). Simply change the program for that day, then
push copy repeatedly until all 7 days (if you so wished)
have been changed.
Setting the Operation
1. Switch the slider to PROG. Press either the +/– button
to move between ON/OFF/AUTO/ALL DAY.
ON: Central Heating and Hot Water is ON continuously
AUTO: Central Heating and Hot Water will be switched
ON and OFF in accordance with set programmes
ALL DAY: Central Heating and Hot Water will switch
ON at the first ON and switch OFF at last OFF
OFF: Central Heating and Hot Water will be
permanently OFF
2. Wait 15 seconds to automatically confirm or press the
Home button. Move the slider to RUN to return to
Run Mode.
12