Programming The Unit; The Factory-Set Programme - ESI ES1247B User Instructions

Programming the unit

The Factory Pre-Set Programme
This Channel Programmer has been designed to be simple
to use, requiring minimal user intervention with a pre-
programmed heating profile.
The pre-set heating times and temperatures will suit most
people (see table below). To accept the factory pre-set
settings, move the slider to RUN which will revert the
programmer to Run Mode (the colon (:) in the LCD display
will begin to flash).
If the user changes from the factory-set programme and
wants to return to it, pressing the reset button with a non
metallic pointed tool will return the unit to the factory-set
programme.
N.B. Every time the reset is pressed, the time and date must
be set again (page 15).
Event
1st ON
1st OFF
2nd ON
2nd OFF
3rd ON
3rd OFF
N.B. If 2PU or 2GR is selected, then events 2nd ON and 2nd OFF
10
Econ
Std Time
Time
06:30 00:00
08:30 05:00
12:00 13:00
12:00 16:00
17:00 20:00
22:30 22:00
are skipped
Econ
Std Time
Time
07:30 00:00
10:00 05:00
12:00 13:00
12:00 16:00
17:00 20:00
22:30 22:00