Setting The Programmer Option (5/2, 7 Day, 24Hr); Setting The Programme - ESI ES1247B User Instructions

7 Day:
In 7 day setting, the pre-set settings are the same as 5/2 Day
programme (Mon to Fri and Sat/Sun).
24 Hr:
In 24hr setting, the pre-set settings are the same as Mon to
Fri of the 5/2 Day programme.

Setting the Programmer Option (5/2, 7 day, 24hr)

1. Switch the slider to HEATING. Press either the +/– button
to move between 7 day, 5/2 day or 24hr operation.
5/2 Day operation is shown by MO, TU, WE, TH, FR
flashing (5 Day) and then SA, SU flashing (2 Day)
7 Day operation is shown by just one day flashing
at a time
24 hr operation is shown by MO, TU, WE, TH, FR, SA,
SU flashing at the same time.
2. Wait 15 seconds to automatically confirm or press the
Home button. Move the slider to RUN to return to
Run Mode.
Settng the Central Heating/Hot Water Programme
1. Move the slider to HEATING. Choose between 5/2 day,
7 day or 24 hr programmer operation (see above steps
1-2).
2. Press the Next
desired day/block of days you want to programme is
flashing.
3. The display shows the 1st ON time. Press +/– to set the
time (10 minutes increments). Press the Next
4. The display shows the 1st OFF time. Press +/– to set the
time (10 minutes increments). Press the Next
button. Press the Day button until the
button.
button.
11