Program - Interlogix TruVision TVB-2402 Installation Manual

When the camera initially starts up, the heater will
start to work automatically when the temperature is
below -10 °C (14 °F). However, with continuous
operation the heater will not work until the internal
temperature drops below -30°C (-22 °F).
Note: The TVB-2402/4402 and TVB-2404/4404
operating temperature range is between -30 and
+60 °C (-22 to +140 °F).

Program

Once the camera hardware has been installed, you
can then program the camera.
The camera has a built-in OSD button and supports
UtC (Up-to-Coax) control over both 960H analog
and TVI outputs.
Using the buttons
Please press the Menu button to call up the OSD
menu and select an OSD item.
Installation Guide 13