Program Select; Setup - Interlogix UltraView PTZ User Manual

8 UltraView PTZ
User Manual

Program select

The Program select menu (Figure 7) is where you will find the bulk of the UltraView PTZ configuration
menus.
Figure 7. Program select menu
The submenus on the Program select menu are as follows:
•

Setup

on page 8
• Presets on page 20
• Titles/areas
• Current status
• Tours on page 27
• Additional menus
Use the Program select menu (Figure 7) to choose which of these submenus you wish to change. To access a
particular submenu, either press the number associated with it, or navigate to the desired submenu and press
the fast forward button on the keypad.

Setup

Use the setup menus to restore factory default settings, adjust the camera, and adjust system settings.
Previously stored settings in the camera (PTZ) and housing nonvolatile memory will be overwritten.
Clear memory
Clear certain settings and information and return to factory
default settings (Figure 8):
1. Select options 1, 2, 3, 4, 5, or 6 to clear the memory for
the indicated feature. You can also press iris+ and select
the option you wish to clear.
on page 21
on page 26
on page 31
Figure 8. Clear memory