11 SERVICE WORK ON THE CHASSIS
11.29
11.30
64
Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
402618-10
Removing the right side cover
S02036-10
Preparatory work
–
Remove the right side cover. (
–
Remove the main silencer. (
Main work
–
Remove all screws on the main silencer.
–
1
Take off silencer cap
–
2
Take off outer tube
.
–
Pull glass fiber yarn filling
–
Clean the parts that need to be reinstalled and check for
damage.
–
Mount the new glass fiber yarn filling
–
2
Slide outer tube
over the glass fiber yarn filling.
–
1
Insert silencer cap
into the outer tube.
–
Mount and tighten all of the screws.
Guideline
Screws on the main
silencer
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
–
1
Remove screw
.
–
Pull off the side cover sideways in areas
remove toward the front.
p. 64)
p. 63)
.
3
4
off of inner tube
.
3
on the inner tube.
M5
7 Nm (5.2 lbf ft)
p. 63)
p. 65)
A
B
and
, and