Changing The Main Fuse - Husqvarna FC 250 Owner's Manual

14 ELECTRICAL SYSTEM
14.4
104

Changing the main fuse

Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing
under the seat.
R00516-10
–
Connect the battery charger to the battery. Switch on the
battery charger.
Guideline
The battery charger must be suitable for lithium-ion batter-
ies.
–
Switch off the battery charger after charging and disconnect
from the battery.
Finishing work
–
Install the battery. (
–
Mount the seat. ( p. 60)
–
Install the air filter box cover. (
Preparatory work
–
Press and hold the kill switch
the engine stops.
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 59)
Main work
–
Pull starter relay 1 from the holder.
p. 102)
p. 61)
while the engine is idling until
p. 60)