Putting Into Operation After Storage - Husqvarna FC 250 Owner's Manual

19 STORAGE
19.2
124

Putting into operation after storage

401059-01
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since
the engine cannot warm up properly, the water vapor
produced during combustion condenses and causes
valves and the exhaust system to rust.
–
Install the battery. (
–
Remove the motorcycle from the lift stand. (
–
Perform checks and maintenance measures when preparing
for use. ( p. 26)
–
Take a test ride.
p. 102)
p. 46)