Closing The Filler Cap; Cold Start Button - Husqvarna FC 250 Owner's Manual

6 CONTROLS
6.9
6.10
18

Closing the filler cap

F00044-11

Cold start button

S02008-10
–
1
Mount filler cap and turn it clockwise until the fuel tank is
tightly closed.
Info
Run the fuel tank breather hose
1
Cold start button is fitted on the bottom of the throttle valve
body.
The injection system extends the injection time if the engine is
cold and the outside temperature is low. To help the engine burn
the increased amount of fuel, it must be supplied with additional
oxygen by pushing the cold start button.
After briefly opening up the throttle and then releasing the throttle
grip again, or turning the throttle grip towards the front, the cold
start button returns to its original position.
Info
Check whether the cold start button has returned to its
basic position.
Possible states
The cold start button is activated – The cold start button is
•
pushed in all the way.
The cold start button is deactivated – The cold start button
•
is in its basic position.
2
without kinks.