8.
Mount the FWD/REV switch to the cabinet, as
shown in Figure 14, using the screws already
mounted in the cabinet at that location.
Figure 14. Mounting switch to cabinet.
9.
Re-install the remaining fasteners removed in
Step 2.
10. Re-install the rear cover.
Model G1035/G1035P (Mfg. Since 4/10)
11. Slide the handwheel onto the handwheel
shaft shown in Figure 15.
Handwheel
Shaft
Figure 15. Location of handwheel shaft.
12. Tighten the handwheel set screw against the
flat part of the handwheel shaft.
13. Thread the handle into the handwheel, and
tighten the nut on the handle against the
handwheel.
-17-