SATO PW208NX Operator's Manual page 106

Energy Saving
System > Energy Saving
To set the energy saving mode, the setting items are as follows:
1 Sleep Timeout
2 Auto Power-Off
Sleep Timeout
System > Energy Saving > Sleep Timeout
Set the period before the printer enters Sleep Timeout mode.
Initial value : 5 sec.
Setting range : 0 or 5 to 999
Note
If you set the item to 0, the Sleep Timeout function is set to off.
Conditions Not to Transit to the Sleep Timeout Mode
• During adjustment, setting, or download modes
• When the printer is in low-battery status (Error 1043)
• When no battery is installed (Error 1060)
• When the temperature in the printer exceeds the tolerance range (error
1022, 1064, 1065)
Conditions to Return from the Sleep Timeout Mode
• When the cover is closed and opened
• While the printer receives the data
• When any printer button is pressed
• When the battery is removed with an AC adapter connected (Error 1060)
• When an AC adapter is removed or connected.
• When the USB cable is removed or connected.
• When charging is completed
• When the printer detects the low battery status (Error 1043)
• When the Auto Power-Off mode is selected
* When you press a button during the Sleep Timeout mode, the printer
returns to the normal mode.
Press the button again after the printer returns to the normal mode.
* When the printer transits to the Sleep Timeout mode during wireless LAN
connection, the printer returns to the normal mode after it receives the
data. However, if you move the printer temporarily outside the access point
range, the printer is disconnected with the wireless LAN connection. To
establish the wireless LAN connection again, press any button to release
the Sleep Timeout mode. (Wireless LAN model)
Set the period before the printer enters Sleep Timeout
mode.
Set the time to power off the printer when the printer has
not been operated within the specified period.
Starting Up the Printer
Mobile printer PW208NX/PW208mNX
103