SATO PW208NX Operator's Manual page 112

BD Address
Tools > Test Print> BD Address
To perform the BD Address test print, the setting items are as follows:
1 Print Perform the test print.
To stop the test print, press the
button.
2 Pitch Adjust the print position.
3 Offset Adjust the stop position of media.
4 Darkness Adjust Fine tune the print darkness of the print.
Notes
• The values of Pitch, Offset and Darkness Adjust set in the BD Address
menu are reflected to the same item settings in the Factory menu,
Configure List menu, Configure QR menu and Paper Sensor menu.
• The values of Pitch, Offset and Darkness Adjust set in the BD Address
menu are reflected to the same item settings in the Adjustment mode
( page 63).
Initial value : 0 dot
Setting range : –30 to 30 dots
Initial value : 0 dot
Setting range : –30 to 30 dots
Initial value : 50
Setting range : 0 to 99 dot
Note
0 is the lightest and 99 is the darkest.
button or
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
109