Log Out; Ptz Control - Q-See QSD9004V User Manual

Network
④ ④ ④ ④
Picture 6-10
Setting
⑤ ⑤ ⑤ ⑤
Picture 6-11
Host Info
⑥ ⑥ ⑥ ⑥
Picture 6-12
6.3.1.4

Log out

Log out of the system.

6.3.2 PTZ Control

Note: below-mentioned series no will be consistent with the remark no shown as Picture 6-2.
2.PTZ direction control: Control PTZ moving direction
○
3.Zoom, Focus and Iris Control: control direction, zoom, focus and iris of PTZ.
○
4.Presetting bit Control
○
CUR ： ： ： ： d isplay current presetting bit or input a presetting bit you want to fix at according edit box
menu. Remote setup methods are the same as
local DVR setup.
Set.
(shown as Picture 6-11);
saving path and screen capture saving path.
Internet video transmission, set user password, turn
daylight saving time on/off, etc.
Picture 6-12). Here you can check Usage rate of HDD,
available recording time, software version and MAC address.
(Numbers 2, 3, 4 on Picture 6-3)
Click [Network] to enter into [Network]
Please refer to Section 5.2.3. – Network
Click [setting] menu to enter into the menu interface
Click [...] button to preview net-viewer recording
The menu also allows you to set a lower bandwidth for
Click [Host Info.] to enter into the sub menu (shown as
35
User Manual
。