1. Manuals
  2. Brands
  3. Q-See Manuals
  4. DVR
  5. QSC26408
  6. User manual

Q-See QSC26408 User Manual

Commercial series net dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Thank you for purchasing our embedded Net DVR. This manual is applicable for QSD42208,
QSC26408, and QSC26416 Net DVR, as well as the QSF2648008 and QSF2648016 Enterprise
DVR models. Please read this User Manual carefully to ensure that you can use the device
correctly and safely.
DISCLAIMER: The contents of this Manual are subject to change without notice; we are
also not responsible for typing errors or errors of omission.
User Manual for Commercial Series Net DVR
Commercial Series Net DVR

User Manual

(V2.0)
Contact Us:
Q-See Products
8015 E. Crystal Dr
Anaheim, CA 92807
Website:
http://www.q-see.com

Customer Service:

Phone: 877-998-3440 x 538
Email: cs@dpsi-usa.com

Tech Support:

Phone: 877-998-3440 x 539
Email: ts@dpsi-usa.com
714-998-3509
Rev 082907D
Page
Total
1
Fax:
121

Advertisement

Table of Contents
loading

Related Manuals for Q-See QSC26408

Summary of Contents for Q-See QSC26408

  • Page 1: User Manual

    Thank you for purchasing our embedded Net DVR. This manual is applicable for QSD42208, QSC26408, and QSC26416 Net DVR, as well as the QSF2648008 and QSF2648016 Enterprise DVR models. Please read this User Manual carefully to ensure that you can use the device correctly and safely.

  • Page 2: Table Of Contents

    HDD Installation ... 8 Rear Panel Description ... 9 2.3.1 8-ch QSD42208 Rear Panel ... 9 2.3.2 8-ch/16-ch QSC26408/16 Rear Panel ... 10 External Alarm In/Out Connection ... 12 Chapter 3 Operational Instructions ... 13 3.1.1 8-ch QSD42208 Front Panel ... 13 3.1.2...
  • Page 3 External Alarm Input and Relay Output ... 75 6.14 Network Parameters ... 79 6.141 Accessing the DVR over a network ... 81 6.142 Accessing the DVR from a remote computer ... 82 6.15 PTZ ... 83 6.16 RS232 setup ... 87 6.17 Exceptions ...

  • Page 4: Version Description

    3. Supports DS-1000KI network keyboard 4. Supports E-SATA HDD backup E-SATA interface in QSD42208, QSC26408, and QSC26416 model DVRs is optional. 1 internal SATA interface can be extended to E-SATA (external SATA) interface. In DVR “Recording” menu, you can select 1 SATA HDD as either “Recording”...
  • Page 5 User Manual for Commercial Series Net DVR If you select “Backup” mode, in DVR “Playback” menu, you can select SATA HDD for backup. 5．Solved some old version bugs VGA black screen and Aux audio output issues Page Total...

  • Page 6: Chapter 1 Product Introduction

    TCP/IP. The firmware is burned into flash memory, more stable and reliable. The Commercial series device has both the features of digital video recorder (DVR) and digital video server (DVS). It can work stand alone, also be used to build a powerful surveillance network, widely used in banking, telecommunications, transportation, factories, warehouses, irrigation, etc.
  • Page 7 Network record real time stream. Network download and playback of the recorded files in DVR. Remotely upgrade the firmware. RS-232 supports transparent channel function so that the remote PC can use DVR to control serial devices. Supports bi-directional voice talk or one-way voice broadcast.

  • Page 8: Chapter 2 Installation

    The DVR has no HDD when leaving factory. Based on the record schedule, you can calculate the total capacity you need (refer to Appendix A). Please ask the specialist to disassembly the DVR and install HDD. If the vendor you purchased the DVR from did not include a HDD have HDD installed by qualified technicians.

  • Page 9: Rear Panel Description

    Keyboard Interface RS-485 External Alarm Input Relay Output AC Input E-SATA User Manual for Commercial Series Net DVR Description Standard BNC. Standard BNC. Connect CCTV monitor, output video and menu. VGA display. Connect RS-232 devices. Refer to Appendix B for pin definition.

  • Page 10: 8-Ch/16-Ch Qsc26408/16 Rear Panel

    2.3.2 8-ch/16-ch QSC26408/16 Rear Panel Index Physical Interface Video Input Audio Input Aux video Output Aux audio Output Main video output Main audio output Line In VGA Interface RS-232 User Manual for Commercial Series Net DVR QSC26408 Rear Panel QSC26416 Rear Panel Description Standard BNC.
  • Page 11 SATA to E-SATA. RS-485 terminal resistor switch. Default is off. The resistor is 120Ohm. PTZ connection. Using T+/T- to connect PTZ. Using D+/D- for keyboard and DVR cascade connection. Can use Hikvision DS-1000K1, DS-1002K1, DS1003K1 16 sensor alarm in. 4 replay output.

  • Page 12: External Alarm In/Out Connection

    Please note the usage of jumper JJ1. If you use DC, either connection is OK. We suggest you use DC under 12V, 1A. If you use AC, please open the jumper. There are 4 jumpers (JJ1, JJ2, JJ3 and JJ4) on DVR main board, corresponding with 4 alarm output. The default is closed.

  • Page 13: Chapter 3 Operational Instructions

    Lamp twinkle and red means the corresponding HDD has error. Device switch with power indicator lamp. Green means DVR is working; Red means DVR is powered off; No light means no power is supplied. 1. Switch preview mode into menu;...
  • Page 14 User Manual for Commercial Series Net DVR PREV INFO Main/Aux Input Numeric Keys Keys Control Direction Keys Keys ENTER 2. 【IRIS-】in PTZ control. 1. Input switch (number, lower case, upper case and symbol); 2. 【FOCUS+】in PTZ control; 3. In preview mode, display or hide the channel status bar.

  • Page 15: 8-Ch Qsc26408 Front Panel

    Orange means recording and network transmission. Device switch with power indicator lamp. Green means DVR is working; Red means DVR is powered off; No light means no power is supplied. DVR is ready. Green means you can use IR remote control.
  • Page 16 User Manual for Commercial Series Net DVR EDIT PREV INFO Main/Aux Input Numeric Keys Keys Control Direction Keys Keys ENTER 1. Local playback 2.【AUTO】in PTZ mode. 1. Manual record; 2. 【SHOT】in PTZ mode (adjust preset). 1. In edit state, delete current cursor character;...

  • Page 17: 16-Ch Qsc26416 Front Panel

    Orange means recording and network transmission. Device switch with power indicator lamp. Green means DVR is working; Red means DVR is powered off; No light means no power is supplied. DVR is ready. Green means you can use IR remote control.
  • Page 18 User Manual for Commercial Series Net DVR EDIT PREV INFO Main/Aux Input Numeric Keys Keys Control Direction Keys Keys ENTER 1. Manual record; 2. 【SHOT】in PTZ mode (adjust preset). 1. In edit state, delete current cursor character; 2. 【IRIS+】 in PTZ control;...

  • Page 19: Remote Control

    User Manual for Commercial Series Net DVR Remote Control Index Name POWER Numeric Keys EDIT PLAY INFO VOIP MENU PREV Direction Keys ENTER Description Turnoff device. Enable/Disable IR remote control Same as numeric keys of front panel. Same as EDIT key of front panel.
  • Page 20 Press【DEV】key, input the DVR device ID (default is “88”, can be changed in “Display” menu) and then press【ENTER】key. If the “STATUS” lamp of DVR front panel turns to green, it means you can use IR controller to operate this DVR.

  • Page 21: Menu Description

    User Manual for Commercial Series Net DVR Menu Description 3.3.1 Menu Items Menu Name Function Video standard Brightness Menu transparency Unit name Display Device ID Require password Screen saver time VGA resolution Date and Time Overwrite/Stop recording Resolution parameters setup...

  • Page 22: Menu Operation

    User Manual for Commercial Series Net DVR Text input mode Transaction ATM IP address ATM type Text information 3.3.2 Menu Operation How to enter into menu mode Press【MENU】key to enter into DVR main menu. Press【PLAY】short key to enter into playback menu.
  • Page 23 User Manual for Commercial Series Net DVR 【ENTER】key to enter into the secondary menu. For example, move the “Active Frame” to the “Image” icon, press 【ENTER】to enter into the secondary menu show below: Each menu contains different kinds of items. There is a rectangular frame called “Active Frame”...
  • Page 24 User Manual for Commercial Series Net DVR to parent menu. Press 【 Cancel】 button to cancel and return to parent menu. The button in grey means it can be operated only after it is enabled. How to exit menu Press【PREV】key to exit menu and return to preview mode.

  • Page 25: Character Input

    User Manual for Commercial Series Net DVR Character Input In the menu interface, if you enter into edit status (for example, in the “camera name” edit box), at the bottom of screen, the input status appears: Here you can press numeric keys to input digital numbers.

  • Page 26: Chapter 4 Basic Operation Guide

    HDD icon has a “×”, it means the corresponding HDD is not installed or not detected. If the HDD is installed but not detected, please contact administrator. Note: If HDD is not installed or not detected, DVR will beep for alarm. You can disable the alarm option in “Exceptions” menu.
  • Page 27 User Manual for Commercial Series Net DVR Press【A】key to display or hide the camera status bar. Camera record status is: Icon Icon Color White Yellow Pink Green Blue Status Description No video signal Vdieo input Manual recording Real time recording...
  • Page 28 Camera alarm status is: Icon Icon Color Press numeric keys to switch to individual camera preview. If DVR has less than 10 channels, press one numeric key to switch corresponding channel. For example, press 【 2】 key to preview 2 camera.

  • Page 29: User Name And Password

    The “Active Frame” will be moved to “Confirm” button. Press【ENTER】key to enter into main menu. If there is beeper alarm, it means the user name and password do not match. After three incorrect trys the DVR will enter into preview mode.
  • Page 30 User Manual for Commercial Series Net DVR Setp 2: Enter into password modification menu Move the “Active Frame” to “Password” icon by using【à】/【ß】keys. Press【ENTER】 key to enter into password menu: Step 3: Input new password Press【EDIT】key to enter into edit box. You can use numeric keys to input new password.

  • Page 31: Ptz Control

    PTZ. Select channel In PTZ control mode, you can press numeric keys to select channel. If DVR has less than 10 channels, press one numeric key to select. For example, press【2】key to select 2 DVR has 10 or more than 10 channels, you must press two numeric keys to select. For 【...
  • Page 32 Adjust preset description In PTZ control mode, press【REC/SHOT】key, and press the preset number (three numeric keys), DVR will adjust the corresponding preset number. Repeat pressing【REC/SHOT】key, and press the preset number, DVR will adjust that preset number. When you exit PTZ control mode, the camera will stay at the current position.

  • Page 33: Manual Record

    User Manual for Commercial Series Net DVR Manual Record Note: The user must have the corresponding right, DVR must have HDD and HDD must be formatted. Manual record In preview mode, press【REC】key, in the pop-up login dialog, select the name and input the correct password, you can then enter into the “Manual Record”...

  • Page 34: Playback

    User Manual for Commercial Series Net DVR Press【PLAY】key to enter into playback menu. Press【PTZ】key to enter into PTZ control mode. Playback Note: The user must have “Playback” right. Playback interface In preview mode, press【PLAY】key, in the pop-up login dialog, select username and input correct password, you can enter into “Playback”...
  • Page 35 Main Channel: Use【↑】or【↓】key to select one channel. Second: If DVR supports 2-ch playback, you can use 【↑】 or 【 ↓】 key to select the second channel. These two channels can be played back simultaneously. If you select the second channel as none, only the main channel is played back.
  • Page 36 Use 【 ↑】 【 ↓】 keys to move scroll bar to the file, press 【ENTER】 key to playback the selected file. If DVR can not find any matched files, a message dialog box will pop-up. Page...
  • Page 37 User Manual for Commercial Series Net DVR Operation when playing back Playback picture: At the bottom of the image, there is an information bar with the following information: Volume, Play Progress, Play Speed, Played Time and File Total Time. Display/Hide information bar: 【MENU】...
  • Page 38 Exit: 【ESC】 Playback switch: When in 2-ch playback, press【PREV】to switch between main channel and second channel. Note: When DVR is busy, if you select high play speed, there may be a difference from actual play speed. Exit playback In playback interface, press【ESC】key to enter into preview mode.

  • Page 39: Backup Recorded Files

    A pop-up dialog box will display the backup status. If backup device is not connected correctly or DVR does not detect the backup device, the following dialog box will pop-up. Please ask administrator for more information.
  • Page 40 You can repeat step 2 to select many segments. 30 segments can be selected in all; After you select all segments, press【ESC】key, a message window will pop-up. If you press “Confirm” button, DVR will start to backup the selected segments. If you press “Cancel” button, DVR will abort backup.

  • Page 41: Shut Down Dvr

    In preview mode, a login dialog box will pop-up, select user name and input password, press 【Enter】to enter into power off dialog box and press “Confirm” to shut down DVR. If you input incorrect password three times, DVR will return preview mode.
  • Page 42 DVR can not be shut down. Abnormally Shutting down DVR Using the power switch on rear panel When DVR is running, if you switch off the power, the HDD in DVR may be damaged. Please avoid such operation. Taking away the power cable Please avoid taking away the power cable directly.

  • Page 43: Chapter 5 Main And Aux Output Function

    Chapter 5 Main and Aux Output Function Main and aux output QSC26408, and QSC26416 Commercial series DVRs have one main output and one aux output. You can use main video output to enter into DVR menu as follows, while aux output can not display DVR menu.

  • Page 44: Main And Aux Output Preview

    User Manual for Commercial Series Net DVR Main and Aux output preview You can use “Main” output to enter into DVR menu, setup both “Main” and “Aux” output preview properties. Please press 【Main/Aux】 button to enter into “Main” output control mode, then press 【Menu】...
  • Page 45 User Manual for Commercial Series Net DVR Preview mode: For preview mode item, you can use 【 ↑】 【↓】 key to select one mode. If DVR has only 1 channel, you can select only “1 Screen” option. If DVR has 4 channels, there are “1 Screen”...
  • Page 46 User Manual for Commercial Series Net DVR After you define the camera preview order, you can select preview mode to meet your demand. Save setup: Press “Confirm” button to save preview configuration. Press “Cancel” or 【ESC】key to abort. Whether in “Main” or “Aux” output control mode, you can press 【PREV】button to enter into live preview and change preview screen mode.

  • Page 47: Main And Aux Output Playback

    User Manual for Commercial Series Net DVR Main and Aux output playback Both “Main” and “Aux” output can be used to playback the recorded files on DVR HDD. Press 【Main/Aux】 button to enter into “Main” or “Aux” control mode, and press 【PLAY】 button to enter into “Playback”...

  • Page 48: Main Or Aux Output To Control Ptz

    【ESC】button to exit PTZ control mode. Only the users that have “Parameters Setup” right need read this chapter. When the following parameters are modified and saved, you must reboot the DVR to make the new parameters effective. Other parameters do not require you to reboot.

  • Page 49: Chapter 6 Parameters Setup Guide

    Chapter 6 Parameters Setup Guide Only the users that have “Parameters Setup” right need read this chapter. When the following parameters are modified and saved, you must reboot the DVR to make the new parameters effective. Other parameters do not need to reboot.
  • Page 50 User Manual for Commercial Series Net DVR Move “Active Frame” to “User” icon, press【ENTER】key to enter into “User Management” menu. In the user name list box, only “admin” exists. You can use 【→】 key, move “Active Frame” to password edit box, and press【EDIT】key to enter into edit status. Press numeric keys to input the new password.

  • Page 51: Add And Delete User

    User Manual for Commercial Series Net DVR Add and Delete User Enter into “User Management” interface. Add user The steps are as follows: Step 1: Enter into “User Management” menu Please refer to chapter 5.1 Step 2: Add new user name In the “User Management”...
  • Page 52 User Manual for Commercial Series Net DVR In the users list box of “User Management” menu, use【á】 【â】keys to select the new user name, then use【à】key to the password edit box. Press【EDIT】key to enter into edit box, use numeric keys to input the new password.
  • Page 53 Com Control: DVR RS-232 transparent channel function. MAC address This MAC address is not the address of DVR but the PC that will access DVR. If you setup this MAC address, only the PC with this MAC address can access this DVR.

  • Page 54: Unit Name And Device Id

    When you use IR controller to operate DVR, you must use device ID to select DVR. The default device ID of the DVR is “88”. If there is more than one DVR in one place, please set a different device ID for each DVR. Otherwise, the IR controller will control all DVRs with the same device ID at the same time.

  • Page 55: Video Output Standard And Vga Setup

    VGA setup There is one VGA interface on the rear panel of DVR. You can use it to connect with a VGA display. You can define VGA resolution and refresh frequency in “Display” menu. There are three options: 1024*768/60Hz, 800*600/60Hz and 800*600/75Hz. You can use 【á】...

  • Page 56: Osd Setup

    User Manual for Commercial Series Net DVR OSD Setup OSD is an abbreviation for “On Screen Display”. For our embedded net DVR models it includes displaying system time and camera name. OSD settings include: System time, time format, time display position, camera name, camera name display position, etc.
  • Page 57 User Manual for Commercial Series Net DVR Display mode: There are several display modes: Opaque&Steady, Transparent&Steady, Transparent&Flashing, Opaque&Flashing, Move “Active Frame” to “OSD” item, you can select one mode. Display position and format: Move “Active Frame” to “Position” button on the right side of “OSD”, press 【ENTER】to enter into setup image, there are 22*18 (for NTSC, 22*15) small...
  • Page 58 User Manual for Commercial Series Net DVR The steps for camera name setup: Step 1: Select one camera. Step 2: Move “Active Frame” to camera name edit box, press【EDIT】key to enter into edit status, you can input digital number, uppercase and lowercase characters (refer to Chapter 3.4).

  • Page 59: Video Parameters Setup

    User Manual for Commercial Series Net DVR Video Parameters Setup For different cameras and different backgrounds, in order to get the best video image, you may need to adjust video parameters such as brightenss, saturation, contrast and hue, etc. You can setup the cameras individually, and you can copy the video parameters of one camera to any other cameras.

  • Page 60: Mask Area Setup

    User Manual for Commercial Series Net DVR Mask Area Setup In some cases, you may want to mask a sensitive area. This area will not be previewed or recorded. The mask area setup steps are following: Step 1: Enter into “Image Setup” menu: Step 2: Select a camera: You can use【á】...
  • Page 61 User Manual for Commercial Series Net DVR Step 4: Setup mask area: In the mask area setup interface, there is one small yellow pane on the upper left side. For PAL camera, the whole screen is divided into 22*18 panes (22*15 for NTSC), you can use 【↑】...

  • Page 62: View Tampering Alarm

    User Manual for Commercial Series Net DVR View Tampering Alarm If you enable this function, when someone blocks the camera spitefully, DVR will transmit a warning alarm. Step 1: Enter into “Image Setup” menu: Step 2: Select camera: Please use【á】 【â】keys to select one camera.
  • Page 63 Select “Off” option for “View Tampering”, you can delete the view tampering area. Note: Only one view tampering area can be setup for each camera. The view tampering area can not be copied. If the schedule is modified, you must reboot the DVR to make the parameters effective.

  • Page 64: Video Loss Alarm

    Video Loss Alarm When the video cable or camera has something wrong, the video image is lost. If you enable video loss alarm, in such case, the DVR will send an alarm. Step 1: Enter into “Image Setup” menu: Step 2: Select camera: Use【á】 【â】keys to select one camera.
  • Page 65 Step 4: Setup alarm schedule: You can setup a working schedule. Only when the video loss occurs during the schedule will the DVR respond. Note: The 4 time periods can not be repeated. Please reboot the DVR to make parameters effective.

  • Page 66: Motion Detection Alarm

    That is motion detection sensitivity. There are 7 options, from 0 (the lowest) to 5 (the highest) and “Off”. You can use 【 ↑】 【↓】 keys to select one. If you select “Off” option, DVR will not respond even if motion is detected.
  • Page 67 User Manual for Commercial Series Net DVR The whole screen is divided into 22*18 panes (NTSC: 22*15). There is one yellow panel on the upper left side. The motion area setup steps are the same as that of mask area setup (refer to chapter 5.7).
  • Page 68 User Manual for Commercial Series Net DVR 【↓】: Down-enlarge red panel; 【↑】: Up-shrink red panel; 【PTZ】: Set whole screen as motion area; 【A】: Clear all motion areas; 【ENTER】: Save and return to “Image Setup” menu; 【ESC】: Cancel setup and return to “Image Setup” menu;...

  • Page 69: Preview Properties

    DVR will display the related camera. If more than one camera is triggered the DVR will display them one by one every 10 seconds. When the motion alarm is has ended the DVR will return to preview mode.
  • Page 70 Step 2: Preview properties: Preview mode: For preview mode item, you can use 【 ↑】 【↓】 key to select one mode. If DVR has only 1 channel, you can select only “1 Screen” option. If DVR has 4 channels, there are “1 Screen”...

  • Page 71: Recording Setup

    Resolution: The higher the resolution is, the clearer the image is. The resolution options from low to high are: QCIF, CIF, 2CIF, DCIF, 4CIF depending on model. For QSD42208, QSC26408, and QSC26416 DVRs: All channels can support QCIF and CIF resolution.
  • Page 72 DVR will use high bit rate. In this case, DVR can save HDD usage and network bandwidth. If you select fixed bit rate, DVR will use the fixed bit rate to compress image. The bit rate size is defined in “Max Bit Rate” option. In this case, we can calculate the recorded file size and network bandwidth that we need.
  • Page 73 Enable Rec: Enable or disable selected camera record function. “×” means disable and “ü” means enable. Schedule: When you enable recording function, you can setup recording schedule. Note: When the camera’s recording schedule is modified, you must reboot DVR to make it effective. All day recording setup: Step 1: Enter into recording schedule menu In recording menu, use【ENTER】or【EDIT】key to enable record function (“ü”...
  • Page 74 User Manual for Commercial Series Net DVR Step 5: Save Press “Confirm” back to “Recording” menu. Press “Confirm” again to save the parameters and return main menu. None all day recording setup Step 1: Enter into recording schedule menu In recording menu, use【ENTER】or【EDIT】key to enable record function (“ü” flag), press “Schedule”...

  • Page 75: External Alarm Input And Relay Output

    6.13 External Alarm Input and Relay Output For 8-channel DVR, there are 8 external alarm inputs and 4 relay outputs. For 16-channel DVR, there are 16 external alarm inputs and 4 relay outputs. In “Alarms” menu, you can setup each external alarm input.
  • Page 76 Description: If “On Screen Warning” is enabled, when an external alarm happens and DVR is in preview mode, DVR will display the related camera. If you trigger more than one camera, DVR will display them one by one every 10 seconds. When the external alarm ends, the DVR will return to preview mode.
  • Page 77 User Manual for Commercial Series Net DVR Move “Active Frame” to “PTZ Linkage” button, press【ENTER】key to enter into “PTZ Linkage” setup menu: First select one camera, then select one of following PTZ linkage: Preset: Set the flag as “ü” to enable preset, in the preset number edit box and input one preset number that has been setup already.
  • Page 78 In “Alarms” menu, you can copy parameters of current alarm output to other alarm outputs. Step 6: Save setup When you finish setup, in “Alarms” menu, press “Confirm” button to save all parameters. Note: If any schedule is modified, you must reboot DVR to make it effective. Page Total...

  • Page 79: Network Parameters

    *IP address: This IP address must not conflict with other IP addresses. If there is DHCP server in the network, you can set the IP as “0.0.0.0”, save and reboot DVR. In reboot process, DVR will search the DHCP server and get a dynamic IP address. This item will display the dynamic IP address.
  • Page 80 User Manual for Commercial Series Net DVR number, DVR current IP to that fixed IP address. We call that fixed Internet IP as DNS IP. The DNS server with that fixed Internet IP can receive DVR information and used to provide DVR with a dynamic IP address.

  • Page 81: Accessing The Dvr Over A Network

    To access the DVR through a computer you need to make sure the default gateway on the DVR is the same IP address as your router, and the first three sets of numbers of the DVR IP address are the same as the first three sets of numbers of router’s address. Example: if your router’s default gateway is 192.168.1.1 then the default gateway setting in the DVR should be...

  • Page 82: Accessing The Dvr From A Remote Computer

    To access the DVR from a remote computer, in addition to the above steps, you will also need to forward ports 80 and 8000 on the router the DVR is attached to, to the IP address of the DVR. How you would do this depends on the brand and model number of your router. You can go to www.portforward.com...

  • Page 83: Ptz

    Note: In DVR “PTZ” menu, if you select Pelco-P protocol, when you setup PTZ address, please use 1 number higher or lower then the Camera ID. For example, if camera ID is 2, the DVR PTZ address is set as ID 3.
  • Page 84 User Manual for Commercial Series Net DVR key to enter into preset setup menu. You can save 128 preset numbers. Please make sure the PTZ supports preset function before you setup preset. Sequence setup: Each sequence is made up of several cruise points. Each cruise point includes one preset number, dwell time and dwell speed.
  • Page 85 User Manual for Commercial Series Net DVR Please make sure the PTZ you are using can support preset function. Sequence setup In “PTZ” menu, press “Setup” button on the right side of “Sequence No” item, you will enter into “Sequence” setup menu: In “Sequence”...
  • Page 86 User Manual for Commercial Series Net DVR Press “RecCru” button, you will enter into “PTZ control” interface. You can start controlling PTZ with direction keys, press【ENTER】to save the operation track and return to “Cruise” setup menu. Press “StartCru” button to repeat the PTZ track until you press “Stop” button.

  • Page 87: Rs232 Setup

    User Manual for Commercial Series Net DVR 6.16 RS232 setup There is one RS-232 port on DVR rear panel. In main menu, move “Active Frame” to “RS232” icon and perss【ENTER】key, you enter into “RS232” setup menu: RS232 menu description RS-232 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc.
  • Page 88 Cancel: Abort modification and return main menu. Example: PPP (Modem) passive dialup through PSTN There are two Modems. One is connected to the DVR RS-232 port with DCE cable. The other is connected with PC COM port. Setup at DVR end Step 1: RS232 setup: Setup baud rate, data bit, stop bit, parity and flow control.
  • Page 89 Step 3: Save setup: In “Recording” menu, press “Confirm” button to save parameters. Step 4: Setup Modem used on DVR side: Use DCE cable to connect Modem with PC serial port. You can use HyperTerminal or NetTerm to setup modem: AT&F ------------ Retore default parameters (Generally, Modem is hard flow control)
  • Page 90 User Manual for Commercial Series Net DVR Page Total...
  • Page 91 Step 3: Establish the dialup connection Select the Modem connected with PC just like the dialup network connection, input the telephone number connected with DVR’s modem. Input the username, password. They must be the same as in DVR PPP setup.

  • Page 92: Exceptions

    User Manual for Commercial Series Net DVR 6.17 Exceptions The exceptions that can be handled at present include: hard disk full, hard disk error, illegal access, IP address conflict, network failure, and NTSC/PAL difference. Enter into “Exceptions” menu: Including the following handle methods: Audible Warning: DVR beep warning.

  • Page 93: Transaction Information

    User Manual for Commercial Series Net DVR 6.18 Transaction Information The DVR can actively obtain or passively receive the credit card number from ATM machines linked through network or serial port, and credit card number can be overlayed on live video, recorded and playback.
  • Page 94 Transaction type and code When the ATM machine is sending transaction information to bank center, DVR will capture the data package through network, and analyse the data according to the format. Then DVR will overlay the corresponding text on live video.
  • Page 95 User Manual for Commercial Series Net DVR In the case, you must set the RS-232 of DVR as transparent channel mode as follows: A software must be run in the ATM machine, and send the credit card number, transaction code to DVR through RS-232 port.
  • Page 96 User Manual for Commercial Series Net DVR In this case, you must set the RS-232 of DVR as transparent channel mode as follows: Also, a software must be run in ATM machine, and send command to DVR through RS-232 port based on Hikvision communication protocol.

  • Page 97: Chapter 7 Utilities

    Save Parameters Save factory default parameters into FLASH memory. You can reboot DVR to make them effective. Restore Parameters Restore factory parameters for DVR. The IP address, gateway and port number will not be changed back to defaults. Page Total...

  • Page 98: Upgrade

    If you select “FTP” mode, you will enter into “FTP Upgrade” menu: Input the ftp server IP and press【ENTER】key. DVR will connect with FTP server through network and download the firmware file. If you select “USB” mode, please make sure you connect one USB flash memory to USB port on the DVR and that the firmware file is in it’s root directory.

  • Page 99: Hard Disk Management

    Check HDD work status Capacity, Free space, Stand by or not, Normal status or not. Format HDD Before formatting stop all recording. After formatting, you must reboot DVR, otherwise DVR will not work normally. Clear Alarm Out Clear the alarm output manually.
  • Page 100 User Manual for Commercial Series Net DVR If you want to view the log based on default option, just press 【 ENTER】 key. DVR will list all matched information. Also you can select options to search (By Type, By Date, By Type&Date).
  • Page 101 Step 3: Move “Active Frame” to “Search Log” button, press 【 ENTER】 key to start searching. Step 4: When searching is finished, DVR will list all matched alarm information. In the list box, the information includes: Index, Occur Time, Major Type, Minor Type, Panel User, Net User, Host Address, Para.

  • Page 102: System Information

    User Manual for Commercial Series Net DVR System Information Press “System Info” icon in “Utilities” menu, you can get DVR system information: Page Total...

  • Page 103: Chapter 8 Firmware Upgrade

    The DVR firmware is stored in FLASH ROM. You can use DVR upgrade function to write the firmware file (digicap) into the FLASH ROM. There are two cases that you need to upgrade DVR firmware. One is to update old firmware. The other is when the code in DVR FLASH has crashed.
  • Page 104 User Manual for Commercial Series Net DVR Select “Users/rights” under “Security” menu item. The following dialog box will pop-up. Create new user. Click “new user’. New user dialog pops up. Input user name “target”. Click “OK”. In the password dialog box, also input password “target” in “New Password” and “Verify Password”...

  • Page 105: Upgrade Mode

    Please input [u/U] or [ESC] key, Release "ctrl" and "u" keys. Step 4: Press “u” key. In the message line of “IP address of NET DVR”, input any one IP, just make sure DVR IP and FTP server IP are in the same sub net.

  • Page 106: Appendix Ahdd Capacity Calculation

    User Manual for Commercial Series Net DVR Appendix A HDD Capacity Calculation How to calculate total capacity needed by the DVR according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity channel needed for every hour, unit Mbyte.

  • Page 107: Appendix Bdvr Connect Cable Definition

    User Manual for Commercial Series Net DVR Appendix B DVR Connect Cable 1 How to make a RS-485 connect cable Material and tool One twist cable (8 pins), one standard RJ45 connector and one special tool for RJ45. RJ45 introduction Pin definition Make the connect cable according the following;.
  • Page 108 User Manual for Commercial Series Net DVR (1) Use the following method to make the network cable when DVR is connected with network hub or switch. The corresponding relationship of the direct cable (2) Use the following method to make the cross network cable when DVR is directly connected with client-end PC.

  • Page 109: How To Make A Rs-232 Connect Cable

    According to demand, the following three situations are considered to make the serial port plug-in according to the corresponding relationship of the pin definition. (1) When the serial port of the DVR is connected with the DTE device with DB25 plug-in (terminal like computer, annunciator, door access etc), the corrresponding relationship is as...
  • Page 110 User Manual for Commercial Series Net DVR Connection for RJ45 and DB25 (DTE) (2) When the serial port of the DVR is connected with DTE device with DB9 plug-in, the corresponding relationship is as follows: Connection for RJ45 and DB9...
  • Page 111 User Manual for Commercial Series Net DVR of the cable is 8-pin RJ45 plug-in, the other end is DB25 pin plug-in, the corresponding relationship is as following: Connection for RJ45 and DB25 (DCE) Page Total...

  • Page 112: Appendix C Specifications

    External alarm in Relay output 100~240VAC, 6.3A, 50~60Hz Power supply Power consumption 20－42W (without HDD and CD-R/W) User Manual for Commercial Series Net DVR QSD42208 QSC26408 1 channel, BNC (1.0Vp-p, 75Ω) 1 channel, BNC (Linear Electrical Level, 600 Ω) Page...
  • Page 113 1 USB interface, USB1.1, can support USB flash memory, USB HDD, USB interface USB CD-R/W, USB DVD or USB mouse. VGA interface 1 VGA interface, support resolution: 800×600/60Hz, 800×600/75Hz, User Manual for Commercial Series Net DVR QSF2648008/QSF2648016 (Enterprise Series) Page Total...
  • Page 114 Working temperature 14 F—131 F Working humidity 10％--90％ Size 19” Standard (17.25(W)*18(D)*3.75(H)) ≤18 Lbs (without HDD and CD-R/W) Weight PAL: 176*144(QCIF), 352*288(CIF), 704*288(2CIF), 528*384(DCIF), 704*576(4CIF); NTSC: 176*120(QCIF), 352*240(CIF), 704*240(2CIF), 528*320(DCIF), 704*480(4CIF). User Manual for Commercial Series Net DVR Page Total...

  • Page 115: Appendix D Quick Search Function Table

    User Manual for Commercial Series Net DVR Appendix D Quick Search Function Table Type Name User management Safety function Password Management management Recording mode recording Recording para. Playback Backup Preview mode PTZ control Motion detection Local Alarm input monitoring Relay output...
  • Page 116 Remotely playback the recorded files in DVR Download recorded files in DVR. Remotely upgrade firmware. Remotely control serial device connected with serial port of DVR. Using IE or Client software to access DVR Access DVR through PSTN. OSD setup Logo setup View log...

  • Page 117: Appendix E Troubleshooting

    DVR continuously reboots after start up, and makes a sound like “di” every 10 seconds. There are no images on the monitor connected with VOUT after DVR is started.
  • Page 118 User Manual for Commercial Series Net DVR Notes: Place the DVR in well ventilated space so that it operates within the allowed range of temperature and humidity as in specifications. If the circuit board gets wet, dust on circuit board can cause a short circuit. The circuit board, plug and socket, housing fan and housing should be cleaned by brushing.

  • Page 119: Appendix F Product Service

    In order to provide various services to you, please complete registration procedure after you purchase the product. Cut off or copy User’s Information Card and fax or mail it to us after the card is filled in. Address: Q-See Products 8015 E. Crystal Dr Anaheim, CA 92807...

  • Page 120: Appendix G Customer Information Card

    User Manual for Commercial Series Net DVR Appendix G Customer Information Card User’s Name r./Mrs. Company Name Post Address Postcode Phone Number E-mail Model Number of Product Serial Number of Product Purchase Date Distributor Page Total...

  • Page 121: Total

    User Manual for Commercial Series Net DVR Suggestions: Page Total...

This manual is also suitable for:

Qsd42208Qsc26416Qsf2648008Qsf2648016

Table of Contents