Toshiba TOSVERT VF-nC3 Instruction Manual page 76

Reset parameters to default settings 
Use the  parameter to reset all parameters back to their default settings. To use
this function, set parameter = or .
⇒ For more details, refer to Section 4.3.2.
Call saved customer settings 
Customer settings can be batch-saved and batch-called.
These settings can be used as customer-exclusive default settings.
To use this function, set parameter = or .
⇒ For details, see 4.3.2.
4
Search changed parameters 
Automatically searches for only those parameters that are programmed with values
different from the standard default setting. To use this function, select the 
parameter.
⇒ For more details, refer to Section 4.3.1.
4.3.1

• Function
Automatically searches for only those parameters that are programmed with values different from the standard
default setting and displays them in the . Parameter setting can also be changed within this group.
Note 1: If you reset a parameter to its factory default, the parameter will no longer appear in .
Note 2: It may take several seconds to display changed parameters because all data stored in the user parameter
group  is checked against the factory default settings. To cancel a parameter search, press the MODE
key.
Note 3: Parameters which cannot be reset to the default setting after setting  to  are not displayed.
⇒ Refer to Section 4.3.2 for details.
Searching for and resetting changed parameters
: Automatic edit function
D-8
E6581595