Digital Wired Control - Trane AQUA NEW STYLUS CFEB 04 C0M1 Owner's Manual

Name and function of buttons
1. Infrared Signal Receiver
Receives the signal from handheld
remote control and transmits the
signal to indoor unit.
2. POWER Button
Press this button to start unit
operation.
Press this button again to stop unit
operation.
3. Temperature Setting Button
TEMP : Press this button to
increase the set temperature.
TEMP : Press this button to
decrease the set temperature.
4. MENU Button
Press this button to select modes
or functions in the menu.
5. MODE Button
Press this button to select system
operation mode. In cooling only
system, a mode is selected in
sequence as FAN, COOL, DRY,
and back to FAN.
6. FAN SPEED Button
Press this button to select fan
speed.
9

Digital Wired Control

Indicators on Digital Wired
Control
1. CLOCK
Displays present time.
2. ON TIMER
Display ON TIMER when ON
TIMER is set.
3. OFF TIMER
Display OFF TIMER when OFF
TIMER is set.
4. SLEEP Mode
Display sleep symbol
activating SLEEP mode.
5. Room & Set Temperature
- Displays the room temperature.
When FAN or TURBO mode is
selected, the room temperature
will be disappeared until FAN or
TURBO mode is cancelled or
complete.
- Displays the set temperature
(15ºC to 30ºC) when either
button is pressed.
6. FAN Speed
Display the selected fan speed
level: auto, low, medium, or high.
7. Operation Mode
Displays the current operation
mode: FAN, COOL, or DRY in
cooling only system.
8. ECONO Mode
Displays "ECONO" when ECONO
mode is activated.
9. TURBO Mode
Displays "TURBO" when TURBO
mode is activated.
10. SWEEP Function
Displays sweep symbol when
sweep motor is activated.
11. Compressor Status Indicator
Displays compressor status.
Operation Mode
FAN Mode
- Press Mode button to select the
operation mode.
- will be shown on the display
when FAN mode is selected.
- Press FAN SPEED button to select
the desired fan speed level and the
display will show.
Auto, Low, Medium, and High respectively
Note:
• In FAN mode, the LCD display
will not show set temperature and
cannot adjust set temperature,
after
SLEEP, ECONO, and TURBO
mode.
COOL Mode
- Press Mode button to select the
operation mode.
- will be shown on the display
when COOL mode is selected.
- Press either
the desired temperature between
or
15ºC to 30ºC.
- Press FAN SPEED button to select
the desired fan speed level and the
display will show.
Auto, Low, Medium, and High respectively
or
button to set
UNT-SVU002-EN