Trane AQUA NEW STYLUS CFEB 04 C0M1 Owner's Manual page 8

SLEEP Mode
SLEEP mode automatically
gradually adjusts room temperature to
provide great comfort during your rest.
- Press SLEEP button,
shown on the display.
- After one hour operation of SLEEP
mode, the unit will automatically
raise set temperature by 0.5ºC.
- After one and half hour operation
of SLEEP mode, the unit will
automatically raise set temperature
by 0.5ºC again and
display will disappear.
- To cancel SLEEP mode, press
SLEEP mode button again.
Note:
• Set temperature shown on the
display still show the setting without
1ºC added/reduced but it will plus/
minus 1ºC in the memory.
• will disappear from the LCD
display when SLEEP mode
completely operates, after one and
half hours, or is cancelled.
• In case of power failure, SLEEP
mode will be automatically
cancelled.
ECONO Mode
ECONO mode drastically saves energy
with high efficient cooling capacity in COOL
mode by reducing power consumption.
With this simply mode, the user can easily
get energy saving and comfort.
- Press ECONO button. "ECONO"
will be shown on the display.
- The air-conditioner will operates
at low fan speed and raise
temperature by 1ºC from set
temperature.
UNT-SVU002-EN
Wireless Remote Control
- To cancel ECONO mode, press
ECONO or MODE button again.
and
will be
Note:
• ECONO mode operates only in
COOL mode and automatically
operates when air-conditioner is
on the
closed without exitingor canceling
ECONO mode.
• Fan speed can not be changed
while ECONO mode is selected.
SWEEP Function
SWEEP function swiftly distributes
air flow and helps provide better air
circulation in the room with comfortable
cooling.
- Press SWEEP button, "SW" will be
shown on the display.
- The air-conditioner will
automatically sweep the supply air
grille back and forth.
- To cancel SWEEP function, press
SWEEP or LOUVER button again.
Note:
• The supply air grille will be fully
closed when the unit is off.
• The supply air grille will be fully
opened when the unit is on.
• The supply air grille will
automatically stop sweeping when
compressor stops operating and
reactivate SWEEP function once
compressor becomes operating.
• SWEEP function is available only
from 12,000 to 36,000 Btu/h.
LOUVER Function
LOUVER function provides you 5 levels
of air flow direction as your desire with
comfortable cooling.
- Press LOUVER button to select the
desired air flow direction.
Note:
• SWEEP function will be cancelled in
case LOUVER is selected.
• LOUVER function is available only
from 12,000 to 36,000 Btu/h.
FRONT BLADE Function
FRONT BLADE function offers you the
optional supply air grille increasing
air flow direction and circulation with
comfortable cooling or heating.
- Press FRONT BLADE button to
open or close front supply air grille.
Note:
• The front supply air grille will
automatically open when airconditioner
is closed without closing FRONT
BLADE function during the operation.
• FRONT BLADE function is available
only from 12,000 to 36,000 Btu/h.
LIGHT Button
LIGHT button offers you the optional
feature to lighten the LCD display at
any time as you desire.
- Press LIGHT button to lighten the
LCD display for 5 seconds.
Note:
• Whenever you press any button from
6.00 pm to 6.00 am, the LCD display
will automatically be lightened.
SEND Button
SEND button offers you the optional
feature to activate or confirm the
operations shown on the LCD display.
- Press SEND button to activate or
confirm the operations shown on
the LCD display.
Note:
• Whenever you press any button from
6.00 pm to 6.00 am, the LCD display
will automatically be lightened.
ºC/ºF Toggle
The optional feature offers you to
change the temperature display from
ºC to ºF or from ºF to ºC.
- Press and hold SEND button for
5 seconds to change temperature
display.
8