Trane AQUA NEW STYLUS CFEB 04 C0M1 Owner's Manual page 7

Timer Operation
Once you select the timer operation, the
settings are saved in the remote control.
Thereafter, the air-conditioner will start
operating under the same conditions
when you simply push the POWER
button on the remote control.
ON TIMER Setting
You can set ON TIMER to start the unit
automatically at any desired time up to
24 hours as real time.
- Press ON TIMER button. ON symbol
will be shown on the display with
blinking hour number.
- Press either or button to set the
desired hour.
- Press ON TIMER button again to
confirm hour setting and minute
number will be blinking.
- Press either or button to set the
desired minute.
- Press ON TIMER button again to
confirm minute setting. Hour and
minute number will stop blinking.
The unit is now standby for tarting
air-conditioner automatically at the
set time.
- To cancel ON TIMER, press ON
TIMER button again.
Note:
• The user can confirm ON TIMER
during ON TIMER setting process by
pressing SEND button.
• If there are no other buttons pressed
within 15 seconds, ON TIMER will be
cancelled, and the LCD display will
return to show clock.
• After pressing ON TIMER button,
the LCD display will show the last on
timer set by user with blinking hour
number.
• When ON/OFF TIMER is set, the
present time is not displayed.
• Press CLOCK button to see present
time after ON/OFF TIMER was set.
The LCD display will show present
time about 15 seconds and return to
7
Wireless Remote Control
show ON/OFF TIMER. If user press
CLOCK button during the 15 seconds
display of present time, the operation
will be CLOCK setting and return to ON/
OFF TIMER.
• In case of power failure, ON TIMER will
be automatically cancelled as there is no
electricity in the air-conditioner; however,
the set time on the remote control is still
displayed due to batteries. The user has
to cancel and set ON TIMER again or
press SEND button to reactivate ON
TIMER when the electricity is back to
normal conditions.
OFF TIMER Setting
You can set OFF TIMER to stop the unit
automatically at any desired time up to
24 hours as real time.
- Press OFF TIMER button. OFF
symbol will be shown on the display
with blinking hour number.
- Press either or button to set the
desired hour.
- Press OFF TIMER button again to
confirm hour setting and minute
number will be blinking.
- Press either or button to set the
desired minute.
- Press OFF TIMER button again to
confirm minute setting. Hour and
minute number will stop blinking.
The unit is now standby for stopping
airconditioner automatically at the set
time.
- To cancel OFF TIMER, press OFF
TIMER button again.
Note:
• The user can confirm OFF TIMER
during OFF TIMER setting process by
pressing SEND button.
• If there are no other buttons pressed
within 15 seconds, OFF TIMER will
be cancelled, and the LCD display will
return to show clock.
• After pressing OFF TIMER button, the
LCD display will show the last off timer
set by user with blinking hour number.
• When ON/OFF TIMER is set, the
present time is not displayed.
• Press CLOCK button to see present
time after ON/OFF TIMER was set.
The LCD display will show present
time about 15 seconds and return to
show ON/OFF TIMER. If user press
CLOCK button during the 15 seconds
display of present time, the operation
will be CLOCK setting and return to
ON/OFF TIMER.
• In case of power failure, OFF TIMER will
be automatically cancelled as there is no
electricity in the air-conditioner; however,
the set time on the remote control is still
displayed due to batteries.The user has to
cancel and set OFF TIMER again or press
SEND button to reactivate OFF TIMER
when the electricity is back to normal
conditions.
POWERCOOL Mode
POWERCOOL mode rapidly maximizes
the cooling capacity in COOL or DRY mode.
With this simply mode, the user can easily
get the maximum cooling capacity and
comfort.
- Press POWERCOOL button.
"POWERCOOL" will be shown on the
display.
- The air-conditioner will accelerate
capacity up totally 20 minutes or until
room temperature is lower than 18ºC.
- When POWERCOOL mode completely
operates or is cancelled, "POWERCOOL"
will be disappeared from the display
and return to the former settings before
POWERCOOL mode.
- To cancel POWERCOOL mode, press
POWERCOOL or MODE button again.
Note:
• The LCD display will not show fan
speed and set temperature.
• Fan speed and set temperature cannot
be changed while POWERCOOL
mode is selected.
• In case of power failure,
POWERCOOL mode will be
.
automatically cancelled
UNT-SVU002-EN