Trane AQUA NEW STYLUS CFEB 04 C0M1 Owner's Manual page 6

Indicators on Infrared Remote
Control
1. CLOCK
Displays present time.
2. ON TIMER
Display ON TIMER when ON
TIMER is set.
3. OFF TIMER
Display OFF TIMER when OFF
TIMER is set.
4. Transmission Indicator
The transmission indicator lights
when remote control transmits
signal to the indoor unit.
5. SLEEP Mode
Display sleep symbol
activating SLEEP mode.
6. Set Temperature
Displays the set temperature (15ºC to
30ºC) when FAN or POWERCOOL
mode is selected.
temperature will be disappeared
until FAN or POWERCOOL mode
is cancelled or complete.
7. FAN Speed
Display the selected fan speed
level: auto, low, medium, or high.
8. Operation Mode
Displays the current operation
mode: FAN, COOL, or DRY in
cooling only system.
9. SWEEP Function
Displays "SW" when sweep motor
is activated.
10. ECONO Mode
Displays "ECONO"
ECONO mode is activated.
11. POWERCOOL Mode
Displays "POWERCOOL" when
POWERCOOL mode is activated.
UNT-SVU002-EN
Wireless Remote Control
Operation Mode
FAN Mode
- Press Mode button to select
the operation mode.
- "FAN" will be shown on the
display when FAN mode is
selected.
- Press FAN SPEED button to
select the desired fan speed level
and the display will show.
Auto, Low, Medium, and High respectively
Note:
• In FAN mode, the LCD display
will not show set temperature and
cannot adjust set temperature,
SLEEP, ECONO, and
POWERCOOL mode.
after
COOL Mode
- Press Mode button to select the
operation mode.
- "COOL" will be shown on the
The set
display when COOL mode is
selected.
- Press either
the desired temperature between
15ºC to 30ºC.
- Press FAN SPEED button to
select the desired fan speed level
and the display will show.
Auto, Low, Medium, and High respectively
DRY Mode
when - Press Mode button to select the
operation mode.
- "DRY" will be shown on the display
when DRY mode is selected.
- Press either
- Press FAN SPEED button to
Auto, Low, Medium, and High respectively
Note:
• In DRY mode, if the compressor
• SWEEP function will be cancelled
• ECONO mode cannot be activated
CLOCK Setting
- Press CLOCK button to set
- Press either
- Press CLOCK button again to
or button to set
- Press either
- Press CLOCK button again to
Note:
• If there are no other buttons
• User can confirm CLOCK setting
or button to set
the desired temperature between
15ºC to 30ºC.
select the desired fan speed level
and the display will show.
stops working, fan motor and
SWEEP function will be stopped;
fan motor and SWEEP function will
operate when compressor operates.
whenever LOUVER function is
selected.
during DRY mode operation.
clock and will be shown on
the display with blinking hour
number.
or button to set
the clock to the present hour.
confirm hour setting and minute
number will be blinking.
or button to set
the clock to the present minute.
confirm minute setting; hour and
minute number will stop blinking
and the set time will be shown on
the display.
pressed within 15 seconds, clock
setting will be cancelled.
during CLOCK setting process by
pressing SEND button.
6