Download Print this page

Trane AQUA NEW STYLUS CFEB 04 C0M1 Owner's Manual page 10

Aqua new stylus chilled water fan coil convertible type cfeb series 50/60 hz
Hide thumbs Also See for AQUA NEW STYLUS CFEB 04 C0M1:

Advertisement

DRY Mode
- Press Mode button to select the
operation mode.
-
will be shown on the display when
DRY mode is selected.
or
- Press either
button to set the
desired temperature between 15ºC
to 30ºC.
- Press FAN SPEED button to select
the desired fan speed level and the
display will show.
Auto, Low, Medium, and High respectively
Note:
• In DRY mode, if the compressor
stops working, fan motor and SWEEP
function will be stopped; fan motor and
SWEEP function will operate when
compressor operates.
• ECONO mode can not be activated
during DRY mode operation.
CLOCK Setting
- Press MENU button and select CLOCK
setting by pressing either
- Press MENU button again to set clock
and
will be shown on the display
with blinking hour number.
or
- Press either
button to set the
clock to the present hour.
- Press MENU button again to confirm
hour setting and minute number will
be blinking.
or
- Press either
button to set the
clock to the present minute.
- Press MENU button again to confirm
minute setting; hour and minute
number will stop blinking and the set
time will be shown on the display.
Note:
• If there are no other buttons pressed
within 15 seconds, clock setting will be
cancelled.
UNT-SVU002-EN
Digital Wired Control
Timer Operation
Once you select the timer operation,
the settings are saved in the control.
Thereafter, the air-conditioner will start
operating under the same conditions
when you simply push the POWER
button on the control.
ON TIMER Setting
You can set ON TIMER to start the unit
automatically at any desired time up to
24 hours as real time.
- Press MENU button and select ON
TIMER setting by pressing either
- Press Menu button again to set ON
TIMER and ON symbol will be shown on
the display with blinking hour number.
- Press either
desired hour.
- Press MENU button again to confirm
hour setting and minute number will
be blinking.
- Press either
desired minute.
- Press MENU button again to confirm
minute setting. Hour and minute
number will stop blinking. The unit is
now standby for starting air-conditioner
automatically at the set time.
or
.
- To cancel ON TIMER, select ON
TIMER setting and press MENU
button again.
Note:
• If there are no other buttons pressed
within 15 seconds, ON TIMER will be
cancelled, and the LCD display will
return to show clock.
• After selecting ON TIMER setting, the
LCD display will show the last on timer
set by user with blinking hour number.
• When ON/OFF TIMER is set, the
present time is not displayed.
• In case of power failure, ON TIMER will
be automatically cancelled as there is
no electricity in the air-conditioner.
OFF TIMER Setting
You can set OFF TIMER to start the unit
automatically at any desired time up to
24 hours as real time.
- Press MENU button and select OFF
- Press Menu button again to set OFF
- Press either
- Press MENU button again to confirm
- Press either
or .
- Press MENU button again to confirm
or
button to set the
- To cancel OFF TIMER, select OFF
or
button to set the
Note:
• If there are no other buttons pressed
• After selecting OFF TIMER setting, the
• When ON/OFF TIMER is set, the
• In case of power failure, OFF TIMER
TURBO Mode
TURBO mode rapidly maximizes the
cooling capacity in COOL or DRY mode.
With this simply mode, the user can
easily get the maximum cooling capacity
and comfort.
- Press MENU button and select
- The air-conditioner will accelerate
TIMER setting by pressing either
TIMER and OFF symbol will be
shown on the display with blinking
hour number.
or
button to set the
desired hour.
hour setting and minute number will
be blinking.
or
button to set the
desired minute.
minute setting. Hour and minute
number will stop blinking. The unit
is now standby for starting air-
conditioner automatically at the set
time.
TIMER setting and press MENU
button again.
within 15 seconds, OFF TIMER will
be cancelled, and the LCD display will
return to show clock.
LCD display will show the last off timer
set by user with blinking hour number.
present time is not displayed.
will be automatically cancelled as
there is no electricity in the air-
conditioner.
TURBO mode setting by pressing
either
or .
capacity up totally 20 minutes or until
room temperature is lower than 18ºC.
or
.
10

Hide quick links:

Advertisement

loading