Trane AQUA NEW STYLUS CFEB 04 C0M1 Owner's Manual page 11

- When TURBO mode completely
operates or is cancelled,
"TURBO" will be disappeared
from the display and return to the
former settings before TURBO
mode.
- To cancel TURBO mode, either
press MODE button or select
TURBO mode and press MENU
button again.
Note:
• The LCD display will not show fan
speed and set temperature.
• Fan speed and set temperature
cannot be changed while TURBO
mode is selected.
• In case of power failure, TURBO
mode will be automatically
cancelled.
SLEEP Mode
SLEEP mode automatically
gradually adjusts room temperature to
provide great comfort during your rest.
- Press MENU button and select
SLEEP mode by pressing either
or .
- Press Menu button again to
confirm SLEEP mode.
shown on the display.
- After one hour operation
of SLEEP mode, the unit
will automatically raise set
temperature by 0.5ºC.
- After one and half hour
operation of SLEEP mode, the
unit will automatically raise set
temperature by 0.5ºC again and
on the display will disappear.
- To cancel SLEEP mode, either
press MODE button or select
SLEEP mode and press MENU
button again.
11
Digital Wired Control
Note:
• Set temperature shown on the
display still show the setting
without 1ºC added/reduced but it
will plus/minus 1ºC in the memory.
• will disappear from the LCD
display when SLEEP mode
completely operates, after one and
half hours, or is cancelled.
• In case of power failure, SLEEP
mode will be automatically
cancelled.
ECONO Mode
and
ECONO mode drastically saves
energy with high efficient cooling
capacity in COOL mode by reducing
power consumption. With this simply
mode, the user can easily get energy
saving and comfort.
- Press MENU button and select
will be
ECONO mode by pressing either
or .
- Press MENU button again to
confirm ECONO mode. "ECONO"
will be shown on the display.
- The air-conditioner will operates at
low fan speed and raise temperature
by 1ºC from set temperature.
- To cancel ECONO mode, either
press MODE button or select
ECONO mode and press MENU
button again.
Note:
• ECONO mode operates only in
COOL mode and automatically
operates when air-conditioner is
closed without exiting or canceling
ECONO mode.
• Fan speed cannot be changed
while ECONO mode is selected.
SWEEP Function
SWEEP function swiftly distributes
air flow and helps provide better
air circulation in the room with
comfortable cooling or heating.
- Press MENU button and select
SWEEP function by pressing
either or .
- Press MENU button again to
confirm SWEEP function.
be shown on the display.
- The air-conditioner will
automatically sweep the supply
air grille back and forth.
- To cancel SWEEP function,
select SWEEP function and press
MENU button again.
Note:
• The supply air grille will be fully
closed when the unit is off.
• The supply air grille will be fully
opened when the unit is on.
• The supply air grille will
automatically stop sweeping when
compressor stops operating and
reactivate SWEEP function once
compressor becomes operating.
• SWEEP function is available only
from 12,000 to 36,000 Btu/h.
ºC/ºF Toggle
The optional feature offers you to
change the temperature display from
ºC to ºF or from ºF to ºC.
- Press and hold both
button for 5 seconds to change
temperature display.
will
and
UNT-SVU002-EN