Related Manuals - Omron CJ1W-PRT21 Operation Manual

Related Manuals

The following manuals are related to the NJ-series Controllers. Use these manuals for reference.
Manual name Cat. No.
NJ-series CPU Unit W500
Hardware User's Manual
NJ-series CPU Unit Soft- W501
ware User's Manual
Sysmac Studio Version 1 W504
Operation Manual
CJ-series PROFIBUS W509
Master Units Operation
Manual for NJ-series
CPU Unit
SmartSlice GRT1-series W04E
Communication Unit
Operation Manual
SmartSlice GRT1 Series W455
Slice I/O Units
CS/CJ Series PROFI- W409
BUS Master Unit Opera-
tion Manual
CJ-series PROFIBUS Slave Unit Operation Manual for NJ-series CPU Unit (W510)
Model numbers Application
□□□□
Learning the basic specifi-
NJ501-
cations of the NJ-series
CPU Units, including intro-
ductory information,
designing, installation, and
maintenance. Mainly hard-
ware information is pro-
vided.
□□□□
Learning how to program
NJ501-
and set up an NJ-series
CPU Unit. Mainly software
information is provided.
SYSMAC- Learning about the operat-
□□□
ing procedures and func-
SE2
tions of the Sysmac Studio.
CJ1W-PRM21 Learning about the func-
tions and operating proce-
dures when the CJ-series
PROFIBUS Master Unit is
used in an NJ-series sys-
tem configuration.
GRT1-PRT Learning about the GRT1-
series SmartSlice PROFI-
NET Communication Unit.
GRT1-series Digi- Learning about the various
tal I/O Units, Ana- SmartSlice I/O Units that
log I/O Units, work with the GRT1-PRT-
Counter and Posi- series Communication
tioning Units, Sys- Unit.
tem Units
CS1/CJ1W-PRM21 Learning about the
CS1/CJ1W-PRM21 PRO-
FIBUS Master Units.
Description
An introduction to the entire NJ-series system is
provided along with the following information on
a Controller built with an NJ501 CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
Use this manual together with the NJ-series
CPU Unit Software User's Manual (Cat. No.
W501).
The following information is provided on a Con-
troller built with an NJ501 CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3 lan-
guage specifications
Use this manual together with the NJ-series
CPU Unit Hardware User's Manual (Cat. No.
W500).
Describes the operating procedures of the Sys-
mac Studio.
The functions and operating procedures when
the CJ-series PROFIBUS Unit is used in an NJ-
series system configuration are described as
well as the operation of CX-ConfiguratorFDT.
Describes the GRT1-PRT PROFIBUS Commu-
nications Unit for OMRON's SmartSlice I/O
Units. It also describes how to install and opera-
tion the Unit.
Describes the models, specifications, functions,
operating procedures, and applications of
GRT1-series Slice I/O Units.
Describes the operation and configuration
details of the CS1W-PRM21 and CJ1W PRM21
PROFIBUS DP and PROFIBUS DP-V1 Master
Units when used in CS/CJ series systems.
35