Omron CJ1W-PRT21 Operation Manual page 94

3 Data Exchange with the CPU Unit
Name of Device Variable for CJ-
series Unit
*_SlvInFatlCont
*_SlvInFatlExit
*_SlvInIntelMd
*_SlvInclPLCSta
*_SlvInStartAdr
3-26
Type
BOOL
BOOL
BOOL
BOOL
15 14 13 12 11 10 9 8
CJ-series PROFIBUS Slave Unit Operation Manual for NJ-series CPU Unit (W510)
R/W Description
R Continue on Indicates how the slave will behave on PROFI-
Fatal error BUS in case (the communication with) the host
CPU has a fatal error (CPU ERH indicator ON)
R Exit on fatal
e.g. I/O refresh timeout).
error
*Examine condition of both *_SlvInFatlCont and
*_SlvInFatlExit for slave behavior as shown
below.
*_SlvInFatlCont: FALSE
*_SlvInFatlExit: FALSE
• Slave has not been configured by a master
(n.a.).
*_SlvInFatlCont: TRUE
*_SlvInFatlExit: FALSE
• Continue data exchange, and provide diag-
nostics to the master.
*_SlvInFatlCont: FALSE
*_SlvInFatlExit: TRUE
• Exit data exchange, and provide diagnostics
to the master. In this case the Slave will send
static diagnostics messages to the master.
R Inputs Intel Indicates how the host CPU data words are
mode mapped to a PROFIBUS data exchange tele-
gram.
FALSE: Motorola (high byte first)
TRUE: Intel (low byte first)
The values in *_SlavInSta are provided by the
PROFIBUS master's Set_Prm telegram, and
indicated in *_SlavOutSta after both the
Set_Prm and Chk_Cfg telegrams have been
accepted.
R Include CPU Include CPU status in input data
status in input
Indicates if the CPU status information should
data
occupy the first two words of input data to the
PROFIBUS master.
FALSE: Do not include CPU status words
TRUE: Include CPU status words. See section
3-8 CPU Status Information.
7 6 5 4 3 2 1
Function
0
*_SlvInStartAdr