Screen Size Adjustment - Proxima M1010X User Manual

Input signal source (VIDEO signal)

Screen size adjustment

Your projector comes with screen size adjustment function for you to display desired image size.
1. Press the MENU key on remote controller and the OSD displays. Press arrow
lect Screen icon, press
2. Press arrow
Maintain screen ratio of input signal
Wide screen
Custom
Maintain
screen ratio of
input signal
Wide screen
Custom
Note:
● If no signals was detected, the Auto setting will be accepted automatically and the adjust-
ment popup menu disappears.
● Adjustment range of the horizontal /vertical position ratio and position varies with input
signal.
44
设置
Screen
Select this function to maintain the aspect ratio of the projected image
consistent with its input source.
Provide image in aspect ratio of 16:9 by expanding image width propor-
tionally.
Adjust screen aspect ratio and position manually.
Press key in customization area and Custom options display. Press
key to select desired items.
Horizontal ratio/vertical ratio: Adjust horizontal and vertical screen ratio.
The aspect ratio option will be disabled when the horizontal and verti-
cal screen ratio is set to On. The vertical ratio option dims and appears
unavailable. Adjust the horizontal ratio and the screen size is adjusted
according to the aspect ratio.
Horizontal / Vertical position: Adjust horizontal /vertical position of image.
Global: Save adjustment ratio applicable with all input. Point to Global
your ratio settings. The saved ratio will be used when Custom is selected
by user.
Reset: Reset your adjustments to its initial status. Point to Reset and
reset.
key to se-
Screen
key