Table of Contents
Advertisement
INPUT
key
VOL-
ZOOM/FOCUS
key
Zoom /focus function
1. Press the ZOOM / FOCUS key on the
rear control panel or remote controller for
zooming and focusing.
2. Press arrow key
Press arrow key
image. Default adjustment speed is set
to FAST. You may press the ENTER key,
select STEP for speed fine-tuning.
Lens movement adjustment
1. Press the LENS SHIFT on the rear control
panel or remote controller to adjust posi-
tion of the lens. Default adjustment speed
is set to FAST. You may press the ENTER
key, select STEP for speed fine-tuning.
2. Movement of the lens is shown on the
screen. Press arrow key
the screen to desired location without any
image distortion. Range of screen move-
ment - Upward or downward from the lens
movement axis: 60% for XGA model and
50% for WXGA model. Leftward or right-
ward: 10%.
3. Press and hold the LENS SHIFT key on
the rear control panel or remote controller
for 5 seconds to home it to the center
position.
Auto setup function
Press the AUTO key on your remote controller
(the function is now enabled) to auto execute
settings given in the Auto Setup menu (includ-
ing Auto Searching, Auto PC Adjusting, and
Auto Keystone).
Basic operation
VIDEO
VOL+
LENS SHIFT
key
to zoom in and out.
to change focus of
to move
VGA
IN
P/PR
G/Y
B/PB
Auto setup
MONITOR OUT
key
S-VIDEO
AUDIO
AUDIO
AUDIO
RS-232C
IN1
OUT
IN2
FOCUS key
LENS SHIFT
key
360.2
Zoom / focus
Lens movement
Note:
This arrow key displays in black when the
lens is not moved. It turns red once the
lens is moved for adjustment.
1/5
Auto Setup
Auto Searching
Auto PC Adjusting
Auto Keystone
DVI-D
H/HV
V
R/C
R/C
AUDIO
IN
OUT
ZOOM
FOCUS
FAST
SELECT : ENTER
LENS
SHIFT
FAST
SELECT : ENTER
设置
设置
1/5
Auto Setup
Auto Searching
Auto PC Adjusting
Auto Keystone
ZOOM
key
开
开
设置
Setup
开
open
open
open
27
Advertisement
Table of Contents
