Table of Contents
Advertisement
Lens installation
Please follow steps given below to install lens after its replacement or when optional ones are
employed. Please consult your dealers for details on optional lenses.
Remove the lens
1 Center the lens with its movement func-
tion.
2 Power off your projector and unplug the
AC power cord.
3 Turn it counterclockwise and remove its
decoration ring.
4 Press and hold the lens release button
at top of the casing. Turn it counterclock-
wise until it sticks, and then pull it out of
your projector gently.
Note:
Be careful in removing the lens.
Do not drop it.
●
Do not touch or remove any other component except the lens and parts related to it.
Otherwise, you may experience product failure, electric shock, fire, or other incidents.
●
Make sure model of the lens is compatible with your projector before installing it.
●
For details on lens and its installation, please call local dealers.
18
Installation
Installing lens
1 Turn the lens counterclockwise and
remove its decoration ring.
2 Align the red market on your lens and
your projector and insert the lens in the
latter.
3 Turn the lens clockwise slowly until you
hear a click. Make sure the lens is fully
inserted in your projector.
4 Turn the lens clockwise and replace its
decoration ring.
Lens release
button
Note:
Do not press and hold the lens
release button when installing it.
Advertisement
Table of Contents
