Table of Contents
Advertisement
Input signal source (VIDEO signal)
Video system selection
1 Press the MENU key on remote controller and the OSD displays. Press
Input icon, press
2 Press
key to select Component, VIDEO, or S-Video, and then press OK key.
3 Press
key to select system, and then press OK key. Press
format, and then press OK key.
VIDEO or S-Video
Auto
Your projector may auto detect the input vid-
eo system and adjust to the optimum status.
For PAL-M or PAL-N video system, select the
system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/
PAL-N
If image cannot be displayed correctly, you
may need to select one from PAL, SECAM,
NTSC, NTSC 4.43, PAL-M and PAL-N for
playing.
Component
Auto
Your projector may auto detect the input
component video signal and adjust to the
optimum status.
Component video signal format
If image cannot be displayed correctly, you
may need to select one signal format from
480i, 576i, 480p, 576p, 720p, 1035i and
1080i.
or OK to confirm your selection.
VIDEO system menu (VIDEO or S-VIDEO)
系统(信号格式)
Auto
PAL
SECAM
NTSC
NTSC4.43
PAL - M
PAL - N
VIDEO system menu (component)
系统(信号格式)
Auto
1080i
1035i
720p
576p
480p
576p
480i
key to point to the
key to select desired signal
设置
输入源
视频
设置
输入源
系统(信号格式)
视频
Auto
PAL
SECAM
NTSC
NTSC4.43
PAL - M
PAL - N
设置
输入源
色差分量
设置
输入源
色差分量
系统(信号格式)
Auto
1080i
1035i
720p
576p
480p
576p
480i
41
Advertisement
Table of Contents
