Terminal - Proxima M1010X User Manual

Name and function of individual component of

Terminal

1
9
18
LAN port
Connect network cable to this port for con-
trolling and operating your projector with land
network.
VIDEO IN port
Connect video output signal to this port.
S-VIDEO IN port
Connect S-VIDEO output signal of video
device to this port.
COMPUTER IN port
Connect output signal from computer to this
port.
MONITOR OUT port
Transmit signals from
when your projector is acting as a display
output.
R(PR)/G(Y)/B(PB)/H(HV)/V
– Connect RGBHV format (5-core) signals to
R/G/B/HS/VS port respectively.
– Connect component signals to Y, Pr, Pb port
respectively.
HDMI port
Connect HDMI digital output signals to this
port.
DVI-D IN(HDCP) port
Connect DVI digital output signals to this port.
AUDIO port
Connect audio signal from
14
your projector
2 3 4 5
VGA
10 11 12
to other displays
to this port.
6 7
L
13 14 15
MONO(L/R) port
Connect audio signal from
AUDIO IN1/AUDIO IN2 port
– Connect audio signals for device
DIO IN1
– Connect audio signals for device
DIO IN2
AUDIO OUT port
equipment.
SERIAL port
Connect serial cable to this port when using
RS232 device to control or operate your
projector.
REMOTE IN port
Connect wired remote controller to this port
when the former is used. Connection of a wired
remote controller will disable the wireless one.
REMOTE OUT port
Transmit wired remote controller signals of
to another projector when a wired remote
controller is used.
AUDIO/DVI-D port
Connect audio signals of DVI equipment to
this port.
Anti burglary bar
Power cord connector
8
16
17
to this port.
to AU-
to AU-