Lennox iComfort M30 User Manual page 8

H S S
ome And yStem tAtuS
The following icons are located on home screen and will appear during applicable operations or tasks.
Icon Function
Navigation
Function
System
Status
System
Status
System
Status
i
conS
Table 1. System Icons
Screen Text
Menu
Away
Heating
Cooling
Humidifying
Purpose
Selecting this icon will bring up user and installer
menus.
When the away icon is touched, the system will auto-
matically use energy saving settings - heat-to 62 (16.5)
and cool-to 85 (29.5). Temperatures can be adjusted
by pressing on the available temperature setting (i.e.,
heat-to or cool-to). To exit away, press the cancel icon.
In a zoning system, all zones are set to a single heat-to
and cool-too setting. Note that when manually selecting
Away from the home screen, the Smart Away feature (if
enabled under settings) will be temporally disabled until
Away is canceled.
System is heating the home.
System is cooling the home.
If humidification equipment is installed and configured,
the system will display this message when adding hu-
midity to the air in the home.
8