Lennox iComfort M30 User Manual page 10

Icon Function
System
Status
System
Status
Function
Table 1. System Icons
Screen Text Purpose
A five minute safety delay prevents the compressor
from operating too soon after shut-down to allow inter-
Will start soon
nal pressures to equalize.
This indicates that either the outdoor temperature is
above or below the balance point temperature settings.
The low balance point setting prevents heat pump heat-
ing below the set point and back up heat will be used.
Typically the default is 25°F (-4.0°C), but that setting
can be adjusted by your dealer. At 25°F (-4.0°C) or be-
low for example, only auxiliary heating (electric or gas)
Ambient lockout
is used.
If the high balance point is set to 50°F (10°C ) for exam-
ple, which is also adjustable by your dealer, then aux-
iliary heat will not be allowed. Only heat pump heating
will be used. Anytime the outdoor temperature is below
or above the balance point temperature settings, the
ambient lockout notice will appear on the home screen.
The system is following an active schedule and is tran-
Transitioning to
sitioning to the next temperature setting based on a
next schedule
time indicator.
10