Lennox iComfort M30 User Manual page 19

• Comfort (2-stage heating or cooling, second
stage is locked in until demand is satisfied)
Auxiliary Heat (Heat Pump Systems Only)
• On/Off.
• Allows auxiliary
temperature drops below set balance point
-20 to 75°F (-29 to 24°C), adjustable).
Selecting Auxiliary Heat displays a slider
to adjust balance point levels. The optional
outdoor temperature sensor is required for
balance point operation.
Safety Protection
• Safety Protection - 30 to 100°F (-1 to 38°C),
adjustable). Default when enable is 40 to 90°F
(4.5 to 32°C).
Safety Protection alerts the homeowner
if the house is too cold or hot.
Humidity Screen
Options on the following screen are dependent on
whether humidity control has been enabled and
both humidification and dehumidification has been
enabled.
Humidity control can
commissioning of the system or changed later by
a technician. Options available on the below screen
depends on system configuration settings.
heat operation
be set during initial
if
• Off
• Humidify
> Set point - 45% adjustable RH (15 to 45%)
• Dehumidify
> Set point - 50% adjustable RH (35 to 60%)
• Humidify + Dehumidify
19