Time And Date Display; Humidity Display; Modes / Schedules - Lennox iComfort M30 User Manual

• Heating set point display
• Heating set point indicator on the round
temperature band
• Plus (+) and Minus (–) options
• Home (return to Home Screen)
Touch the red heat set point indicator on
the round temperature band, or touch the
plus or minus to change the heating set
point in one degree increments.
During a scheduled time period, touching
either the set point indicator on the
temperature band or the heat-to will
initiate a schedule hold.
Current Outside Temperature
Displays current outside temperature in °F or °C
(optional Remote Outdoor Temperature Sensor
required). If no sensor is used, then once connected
to the Internet and login to your account through
the thermostat, the option to get your outside
temperature can obtained using the Internet option
. Go to menu > settings > display and set outdoor
temperature display to Internet.
t d d
ime And Ate iSplAy
Displays current time and date (supports daylight
savings time changes). When connected to the
Internet, time and date are automatically set.
H d
umidity iSplAy
Displays current inside relative humidity above
current indoor temperature.
The icon next to the indoor humidity percentage
also represents the humidity level in the home.
m / S
odeS cHeduleS
Displays current system operating mode below
current indoor temperature (heat/cool, heat only,
cool only, active schedule or off)
Touch to access Modes/Schedules screen.
Touch modes/schedules
screen under current operating mode to
access screen.
6
on home