To Start The Engine - Jonsered FR 2312 MA Operator's Manual

• To adjust the seat forward and rearward, loosen the
bolts below the seat. Move the seat to the required
position and tighten the bolts.
To engage and disengage the drive
system, FR 2312 MA
To move the product with the engine off, the drive
system must be disengaged.
• Pull out the drive system lever fully to disengage the
drive on the axle.
• Push the drive system lever in fully to engage the
drive on the axle.
Note: Do not use middle positions.
512 - 001 - 26.01.2018
To lift and lower the cutting deck
• To lift the cutting deck to transport position, pull the
lift lever rearward. If the engine is on, the blades stop
to rotate.
• To lower the cutting deck to mow position, press the
lock button and move the lift lever forward. If the
engine is on, the blades start to rotate.

To start the engine

1. For FR 2312 MA, make sure that the drive system is
To engage and disengage the drive
engaged, see
system, FR 2312 MA on page 13 .
2. Lift up the cutting deck.
13