14-5 MUX-18RV -
E1
OUTDOOR UNIT
OPERATING PROCEDURE
1.Removing the cabinet.
(1) Remove the screws fixing the service panel.
(2) Remove the screw fixing the side panel.
(3) Remove the service panel.
(4) Remove the side panel.
(5) Remove the cabinet.
2. Removing the propeller.
(1) Remove the cabinet.
(2) Remove the propeller nut.
(3) Remove the propeller.
Note: Loosen the propeller in the rotating direction for removal.
When setting the propeller, align the motor-shaft cut sec-
tion.
3.Removing the outdoor fan motor.
(1) Remove the cabinet.(Refer to 1.)
(2) Remove the propeller.(Refer to 2.)
(3) Remove the lead clamps and disconnect the outdoor fan
motor connector.
(4) Remove outdoor fan motor set screws.
(5) Remove the outdoor fan motor.
Photo 1
Side
panel
Side panel
set screw
Photo 2
Propeller
Propeller nut
Photo 3
156
PHOTOS
Cabinet
Service panel
Service panel
set screw
Fan motor
Outdoor fan motor
set screws