Lcd Display Data; Program Display; Time/Interval; Watt/Level - Schwinn 140 Owner's Manual

LCD Display Data
AA1
' _ AA2
AA7 AA3
AA6"
AA5
AA1 Program Display AA5 PULSE
AA2 TIM E/ INTERVAL AA6 DISTANCE
AA3 WATT/ LEVEL AA7 SPEED/ RPM KM
AA4 CALORIES
Note: To change the measurement units to English Imperial or metric, refer to the "Console Setup Mode"
section in this manual.
Program Display
The Program Display shows the name of the program selection and the dot-matrix area shows the course profile for the program.
Each column in the profile shows one interval (1/40of the total program time). The higher the column, the higher the resistance
level and/or speed for that interval. The flashing column shows your current interval.
Time/Interval
The TIME/INTERVALdisplay field shows the time count in the workout. If no preset time is set up for the current workout program,
the display value starts at zero and counts forward until the end of the workout. Maximum time is 99:59.
If the workout has a preset time, the display starts at the preset value and counts down to zero. The display shows the total time
count for the workout, then the time count for the current interval.
Watt/Level
The WATT/LEVEL display field shows the power that you are producing at the current resistance level (1 horsepower = 746watts)
for 6 seconds, the resistance level (1-16) for 6 seconds.