Table of Contents
Advertisement
Chapter 2
Getting Started
This chapter contains basic information on how to use the radio.
2.1
Product Technical Information
Table 2: Product Technical Information
Description
Maximum Voltage
Maximum Current
Maximum Speaker Load
Antenna Impedance
Operating Temperature
Range
Operating Time
NOTICE:
The system (SwMI) determines radio transmit and receive times, which affect the actual radio
operating time.
If the radio overheats (due to high ambient temperature or other factors), thermal protection will
reduce transmitter power, which may lead to loss of communication.
You can attach a colorful o-ring to a radio antenna to distinguish radios from one another.
An RFID knob is available as an optional accessory which allows tracking radios easily. The
knob contains an RFID tag which can be read by handheld scanners greatly enhancing the
speed of radio identification. The knob is a retrofit option and can replace an existing volume
knob.
2.2
Before Power On
Read this section before you power on your radio for the first time.
2.2.1
Attaching the Antenna
Procedure:
1 Insert the screw-in base of the antenna into the antenna terminal on the top of the radio.
2 Turn clockwise until tight.
Send Feedback
Value
7.9 V
1.2 A
1 W at 20 Ω
75 Ω
-10 °C to +50 °C
Duty Cycle
05/05/90
725 mAh, 7.2 V
12 h
6866588D06–RB
Getting Started
19
Advertisement
Table of Contents
