Table of Contents
Advertisement
6866588D06–RB
Chapter 4: Main Menu
4.8.5.3
Audio Toggle
You can control audio routing between the speaker and earpiece for any private or group call through
the dedicated Speaker Control key. You can also define through the menu to have all group calls in
high audio or controlled by the Speaker Control key.
4.8.5.3.1
Setting Audio Toggle
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Audio → Audio Toggle.
3 Select one of the following:
•
Always Loud — The audio sound comes from the speaker (high audio only). S
C
key is disabled.
ONTROL
•
Spkr Cntrl — The audio goes through the earpiece or the speaker. You can switch between
low and high audio by pressing S
4.8.6
Tones
This field sets the volume level for the tones set.
NOTICE: The radio has two tone packs: Classic Tones (default) and New Tones. Your service
provider decides which tone pack is enabled.
4.8.6.1
Keypad Tone
You can activate/deactivate keypad tone at every key press.
4.8.6.1.1
Setting Keypad Tone
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Tones → Keypad Tone.
3 Select one of the following:
•
On — Activates keypad tone.
•
Off — Deactivate keypad tone.
4.8.6.2
All Tones
You can activate/deactivate all tones.
78
C
key.
PEAKER
ONTROL
PEAKER
Send Feedback
Advertisement
Table of Contents
