Chapter 3
Getting Started
This section provides instructions to prepare your radio for use.
3.1
Attaching and Removing the Battery
Attaching the Battery
Procedure:
Slide the battery into the radio frame until the latches click into place.
Removing the Battery
Procedure:
1 Turn off the radio.
2 Lift the latch at the bottom of the radio.
3 Remove the battery from the radio.
3.2
Attaching and Removing the Antenna
Attaching the Antenna
Prerequisites: Ensure the radio is turned off before attaching the antenna.
Procedure:
1 Set the antenna in the receptacle.
2 Turn the antenna clockwise to attach to the radio.
Removing the Antenna
Prerequisites: Ensure the radio is turned off before removing the antenna.
Procedure:
1 Turn the antenna counterclockwise.
2 Remove the antenna from the receptacle.
MN009203A01-AD
Getting Started
29