HEIDENHAIN TNC 640 User Manual page 865

MOD Functions | Ethernet interface
Setting Meaning
Host file
Only required for special
Name of a file in which the assignments of IP
addresses to computer names is defined
Select the Interfaces tab to enter the interface settings:
Setting Meaning
Interface list
List of the active Ethernet interfaces. Select
one of the listed interfaces (via mouse or
arrow keys)
Activate button: Activate the selected
interface (X appears in the Active column)
Deactivate button: Deactivate the
selected interface (- appears in the Active
column)
Configuration button: Open the
configuration menu
Allow IP
This function must be kept
forwarding
Only activate this function if the optionally
available second Ethernet interface should be
accessed externally for diagnostic purposes
via the control. Only do so after instruction by
our Service Department
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
applications:
deactivated.
20
865