HEIDENHAIN TNC 640 User Manual page 686

16
16.4 Tools in turning mode (option 50)
Tool call
Just as in Milling mode, turning tools are called with the TOOL
CALL function. You merely have to enter the tool number or tool
name in the TOOL CALL block.
You can call and insert a turning tool both in Milling
mode and in Turning mode.
Tool selection in the pop-up window
If you open a pop-up window for tool selection, the control marks
all tools available in the tool magazine green.
In addition to the tool number and tool name, the control also
shows the ZL and XL columns from the turning tool table.
Example
1 FUNCTION MODE TURN
2TOOL CALL "TRN_ROUGH"
...
686
Turning | Tools in turning mode (option 50)
Turning mode selection
Tool call
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017