HEIDENHAIN TNC 640 User Manual page 808

Hide thumbs Also See for TNC 640:

Table of Contents

Rotating, enlarging and shifting the 3-D view

Select functions for rotating and zooming

The control displays the following soft keys.

Scroll through the soft-key row

You can also use the mouse to change the graphic display. The

following functions are available:

In order to rotate the model shown in three dimensions, hold

down the right mouse button and move the mouse. If you

simultaneously press the shift key, you can only rotate the

model horizontally or vertically

To shift the model shown: Hold the center mouse button or

mouse wheel down and move the mouse. If you simultaneously

press the shift key, you can only shift the model horizontally or

To zoom in on a certain area: Mark a zoom area by holding the

left mouse button down.

After you release the left mouse button, the control zooms in on

the defined area.

To rapidly magnify or reduce any area: Rotate the mouse wheel

backwards or forwards

To return to the standard display: Press the shift key and

simultaneously double-click with the right mouse key. The

rotation angle is maintained if you only double-click with the

right mouse key

Rotate in 5° steps about the vertical axis

Tilt in 5° steps about the horizontal axis

Enlarge the graphic stepwise

Reduce the graphic stepwise

Reset the graphic to its original size and

Move the graphic upward or downward

Move the graphic to the left or right

Reset the graphic to its original position and

Test Run and Program Run | Graphics

HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017

Show Quick Links

Table of Contents