HEIDENHAIN TNC 640 User Manual page 540

12
In the AFC.TAB
settings (lines) as desired.
If there is no AFC.TAB table in the TNC:\table directory,
the control uses a fixed control setting for the teach-
in cut. If, alternatively, a tool-dependent reference
power value exists, the control uses it immediately.
HEIDENHAIN recommends to use the AFC.TAB table in
order to ensure a safe and well-defined operation.
Proceed as follows to create the AFC.TAB file (only necessary if the
file does not yet exist):
Select the Programming operating mode
To call the file manager, press the PGM MGT key
Select the TNC:\ directory
Create a new AFC.TAB
Press the ENT key
The control displays a list with table formats.
Select the AFC.TAB
The control creates the table that contains the control settings.
540
table you can define as many control
file
table format and confirm with the ENT key
Special Functions | Adaptive Feed Control AFC (option 45)
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017