Edit Settings
1
Assigns functions to the buttons. Click "Command" to
select the command. When you check the "Repeat" box
for the function, the corresponding function will operate
continuously by holding down the button. You can input
the desired function name to "Title."
Automation Window
Overview
This window is for configuring the function of the buttons
in the "AUTOMATION section"
Controls and Functions
1
Automation Settings
1
Configures the function of the buttons. Click "Command"
to select the command.
(page
22).
Description of the Software Programs
Communication Window
Overview
This window is for configuring the function of the buttons
in the "COMMUNICATION section"
"COMMUNICATION page"
(page
Controls and Functions
1
Communication Settings
1
Configures the functions of the buttons. First, click
"Category" to select the category. Next, click "Command"
to select the command. When you check the "Repeat"
box for the function, the corresponding function will
operate continuously by holding down the button. You can
input the desired function name to "Title."
NUAGE MASTER Operation Manual
(page
9) or
41).
45