Yamaha NUAGE MASTER Ncs500-CT Operation Manual page 39

LE
3
Turns Listen on (lit) and off.
LE Level
4
[ PARAM ]
Adjusts Listen level.
On/Off
5
Turns the channel on (lit) and off.
Level Meter
6
Displays the channel level.
Level Indicator
7
[ PARAM ]
Displays the channel level.
Reference Level
8
When turned on (lit), this resets the Control Room level to
the Reference level. When this is off (dim), the previous
level setting is restored. The button goes dim when you
change the level after turning this on.
When you touch Reference Level while holding down the
appropriate button(s) in the "MODIFIER Section"
(page 15), the function changes as follows.
Modifier button Function
[ALT] Resets the Reference level to the current
Control Room level setting.
DIM
9
Turns Dim on (lit) and off (dim). When this is on, the
Control Room level is lowered. When this is off, the
previous level is restored. You can set the Dim level on
Nuendo.
SOLO
)
Selects Solo or Listen of AFL, and Listen of PFL.
Listen Active/Deactive All Listen
!
Lights if Solo or Listen is on for one or more channels.
Touching this while it is lit turns Solo or Listen off for all
channels.
Listen Dim Level
@
Adjusts the level of the Main Mix or Monitor Source when
you use Listen.
[ PARAM ]
Description of the Software Programs
SPEAKER CONTROL Page
This page is for operating the Speaker Controls in Control
Room.
1 2
3
Down Mix
1
Selects the Downmix preset.
Monitor Select
2
Selects Monitor.
Bass Management
3
Turns Bass Management on (lit) and off. This function is
available when connecting a Nuage I/O unit and creating
a surround output bus (such as 5.1 channels) in the
Nuendo menu "Devices"  "VST Connection." Also, make
sure to assign the ports in one Nuage I/O to the ports of
this output bus.
Mix Convert
4
Operates Mix Convert. To turn the output on and off, touch
the speaker icon.
Level Meter
5
Displays the channel level.
NUAGE MASTER Operation Manual
4
5
39