Monitor Control (Nuage Fader, Nuage Master) - Yamaha NUAGE MASTER Ncs500-CT Operation Manual

Monitor Control (Nuage Fader, Nuage Master)

Using the CONTROL ROOM section of the Nuage Fader and Nuage Master, you can control the Downmix, Dimmer on and
off, and monitor output levels.
Nuage Fader — CONTROL ROOM section
1
2
Nuage Master — CONTROL ROOM section
1
2
3
4
1 Turns the Downmix audio output on (lit) or off (unlit).
NOTE
When the Headphone output is selected for control, this button is disabled.
3
2 Turns the dimmer on (lit) or off (unlit).
NOTE
When the Headphone output is selected for control, this button is disabled.
3 Set Main Monitor output level or Headphone output level.
4
4 Switches the operable controls between Headphone output (lit) and Main
Monitor output (unlit).
1 Displays the "Control Room" page on the [Multi function
display].
2 Turns the Downmix audio output on (lit) or off (unlit).
5
NOTE
When the Headphone output is selected for control, this button is
disabled.
3 Select a Speaker Set from Speaker Set A-D.
4 Switches the operable controls between Headphone output (lit)
6
and Main Monitor output (unlit).
7
5 Displays the Monitor Level or the Headphone Monitor Level, and
8
SPL Level.
6 Changes the Monitor Level value to the reference level value.
9
Holding this down for at least two seconds (until the indicator
flashes) stores the current Monitor Level value as the reference
level.
NOTE
When the Headphone output is selected for control, this button is
disabled.
7 Turns mute for the Main Monitor output or Headphone output on
(lit) or off (unlit).
8 Turns the dimmer on (lit) or off (unlit).
NOTE
When the Headphone output is selected for control, this button is
disabled.
9 Set Main Monitor output level or Headphone output level.
Added functions in NUAGE V2.0 59