Yamaha NUAGE MASTER Ncs500-CT Operation Manual page 38

USER ASSIGNABLE Page
Overview
This page is used to execute assigned functions. To open
this page, press the USER ASSIGNABLE [Display access]
button (page 21). To assign the function, configure it in
"NUAGE MASTER Setup" (page
To select the desired bank, touch "BANK 1" – "BANK 4" in
the Title area, or the USER ASSIGNABLE [Display access]
button.
Each bank has twenty-four buttons, for a total of ninety-
six.
By touching "Nuendo" in the Tool area, you can open
"NUAGE MASTER Setup" window
Nuendo screen. Touch again to close.
Controls and Functions
1
U1 – U24
1
Executes the assigned function.
44).
(page 44) on the
Description of the Software Programs
CONTROL ROOM Page
Overview
This page is for operating the Control Room functions. To
open this page, press the CONTROL ROOM [Display
access] button (page 5).
The CONTROL ROOM page has the following pages.
• MAIN page (page 38)
• SPEAKER CONTROL page
To select the desired page, touch the corresponding tab
in the right side of the Title area, or press the CONTROL
ROOM [Display access] button.
If you have configured multiple DAW software programs
and operate them by selecting the DAW SELECT Section
(page 24), this section will always operate the Control
Room of DAW A. In other words, the Control Room section
is not affected by the DAW software selection.
Controls and Functions
MAIN Page
This page is for operating the general functions in the
Control Room.
6
1
2
3
4
5
7
CLICK
1
Turns Metronome on (lit) and off.
CLICK Level
2
[ PARAM ]
Adjusts Metronome level. Adjusts Metronome level.
NUAGE MASTER Operation Manual
(page 39)
8
)
!
@
9
38