Philips Lifeline Instructions For Use Manual page 73

EMC Informational Tables
Table 1 - Guidance and Manufacturer's Declaration – Emissions The EUT
"HomeSafe/GoSafe devices are intended for use in the electromagnetic
environment specified below. The 7000MHB and 7100MHB devices are
provided with battery power adapter charger. The customer or user of the
HomeSafe/GoSafe should ensure that it is used in such an environment.
Emissions Test
RF Emissions
CISPR 11
RF Emissions
CISPR 11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Table 2 - Guidance and Manufacturer's declaration – Immunity
The HomeSafe/GoSafe devices are intended for use in the
electromagnetic environment specified below. The customer or user
of the HomeSafe/GoSafe should ensure that it is used in such an
environment.
Immunity Test
Electrostatic
Discharge (ESD)
EN/IEC 61000-4-2
Electrical fast
transient/burst
EN/IEC 61000-4-4
(only for devices with
battery charger power
supply-7000MHB &
7100MHB)
Compliance Electromagnetic Environment – Guidance
The HomeSafe/GoSafe devices must emit
Group 2
Electromagnetic energy in order to perform its
intended function. Nearby electronic equipment
Class B
may be affected.
The EUTsBattery Powered.
N/A for EUT
The GoSafe 7000AHB and 7100MHB power
Class A for charger
chargers are suitable for use in all
Complies
establishments, including domestic, and those
directly connected to the public low-voltage
power supply network that supplies buildings
used for domestic purposes.
EN/IEC 60601
Compliance
Test Level
Level
6kV
6kV
Contact
8kV Air
8kV Air
±2 kV for ±2 kV for
power
power supply
supply lines
lines ±1 kV for
input/output
lines
Electromagnetic
Environment – Guidance
Contact
Floors should be wood, concrete
or ceramic tile. If floors are
synthetic the relative humidity
should be at least 30%
Electrical power quality should be
that of a typical commercial or
hospital environment.